Super slim under cabinet light designed to help you with everyday tasks in the kitchen. As this is installed underneath the cabinet only the kitchen worktop, where most jobs are completed in the kitchen, are illuminated - providing the light just where you want it.

At only 5mm depth, and in an aluminium or black finish - these can fit under all cabinets with or without a pelmet and match your colour scheme. Being LED means no scorching to furniture and also are cool to touch.

Both finishes are offered in a choice of colour temperatures:

2700°k (soft warm white) incandescent like light output - very warm county cottage lighting

3000ºk (warm white) light output enhances the colours of warm tones and wood materials.

4000ºk (neutral white) excellent balanced light - works well on all modern materials.

6500ºk (daylight white) light output enhances the colour of white, blue, black and silver materials.

Each fitting comes pre-wired with 1800mm of cable. The 3 watt LED chip means this fixture must be used on a DC 12-volt supply.

Please note a driver is required for this product. You can find suitable drivers at the bottom of this listing.

Would you like a local switch to operate and dim these lights?
We have a hand swipe sensor that can be recessed or surface mounted which allows you to turn the lights on/off and dim them with ease. It can be found here

Number Of Lamps	1
Lamp Type	Long Life LED Light Source
Lamp Lumens	260
Lamps Included	Yes
Max Wattage	3w
Total Wattage	3w
Width	60mm
Length	190mm
Height	5mm
Construction	Aluminium
Wiring Details	Class 3 - Requires a low voltage supply
Driver	No driver or transformer is supplied with this fixture (sold separately)
PDF Document(s)	Wireless PIR Sensor Datasheet

I have 3 of these in silver under my kitchen cabinets and am very happy with them. However, on one of them the circular cover over the light fell out into my toaster! The white plastic around it has melted out of shape and it cannot be reinserted. The light still works but without the cover it is just too bright. Will I have to pay for a whole new unit or can you supply (maybe from a return) just this little plastic cover? Many thanks in advance for your reply.
I'm afraid you would have to buy a complete unit.

Can you tell me the length and width of these fittings please regards Neil
Length: 190mm Width: 60mm Height: 5mm These dimensions are listed in the more details tab of the listing.

what is the cable length between light and driver? Is there an extension available if I wanted to position a light over a few metres away?
The cable length between the driver and light is 1.8 metre. This can be extended using standard mains cable.

Do these need a constant current or a constant voltage driver? are they wired in series or parallel?
These light require a constant voltage DC power supply. They only require a parallel connection to the power supply.

Can these lights can be fitted with a 13amp plug?
Yes these can be wired into a UK 3-pin plug if that suits your installation.

how bright are these lights
At around 270 lumens these are as bright as a 20–25 watt lamp. But remember unlike a bulb, all the light is directed down without any waste.

Do you require a special dimmer switch for the dimmable driver?
A normal dimmer switch should be fine for use.

Can you tell me the CRI of both the cool and warm white fittings please?
Both warm and cool white have a CRI of 80.

What is the brightness in lumens of the warm white/cool white models please?
The lumen output is as follows - Warm white: 260. Cool white: 280.