The 6 way port on this power supply is for use with our HD LED Lighting range. It can of course be removed and used with other fixtures that require a 24v constant voltage supply.

This electronic LED converter is exclusively designed for 24V LED lamps used indoors. The electronic converter is a switch mode power supplier with 24VDC constant output voltage. The electronic LED control gear is designed and manufactured with high performance and multi protection functions; the long time overload protection, long time open circuit protection, long time short circuit protection, long time over heat protection. The control gear will restart automatically after the fault conditions removal, so the user can select and use it very freely.

Cable lengths between PSU and JB box: 140mm
To PSU 1.5m cable.

IP20 independent LED electronic control gear
Class II protection against electric shock from direct and indirect contact
DC24V constant voltage output and max. 15w load (min 0.5w)
Latest SEMKO safety and EMC approval

Lamp Type	Not Applicable
Max Wattage	15w
Wiring Details	Class 2 - Double Insulated - Requires no Earth Connection

How long is the power lead?
The power lead to the driver is 1.5m long

I`m replacing some old under cupboard strip lights - Can I wire this directly to the existing lighting circuit then feed off to the LEDs?
Yes that`s absolutely the right thing to do. That way the power supply is protected by the fuse or MCB on your lighting circuit.