Add vibrant, customisable lighting to your home or garden with this economical RGB LED kit, complete with 10 compact lights. Perfect for illuminating kitchen plinths, enhancing exterior decking, or adding style to bathrooms.

The included RF remote makes control straightforward. Select from a range of fixed colours and adjust brightness to suit your mood. Enjoy two lighting effects, either rapid switching for impact or a smooth, gradual colour transition. The system remembers your last setting, so you can pick up right where you left off.

Key features:

Seven colour options: yellow, white, red, green, blue, purple, and light blue
Two lighting modes: rapid change or gradual colour phase
Remote control brightness adjustment (not dimmer switch compatible)
Lights work individually, do not install in pairs as they will not synchronise

The kit includes 10 lights, though you can use fewer if preferred.

A 5-metre extension cable is provided for flexible installation, with each light featuring a 76 cm lead. The distance from the plug to the first fitting is 145 mm, extendable with the supplied cable.

Number Of Lamps	10
Lamp Type	Long Life LED Light Source
Total Wattage	20w
Height	38mm
Diameter	40mm
Cut-Out Diameter	30mm
Construction	Electroplated Steel
Wiring Details	Class 3 - Requires a low voltage supply
IP Rating	IP67
PDF Document(s)	Measurements

Do you have lights with black covers and not silver?
No, silver covers only.

I would like to change colours/dimm from switch or remote control or both if possible? Can the bulb be replaced? Also need about 20 lights for my fence - can I connect them to the above on one remote control?
These light can be dimmed/controlled using the remote control only, the maximum spacing is 75cm apart, the LED's are not replaceable, we believe you can control more than one set of lights with the same controller.

Good morning, can you give me a dimensions of the lights it self as i’am looking to put these in my media wall. And also the quickest delivery option or possible collect from store. Tia
The lights are 40mm wide and require a 30mm cut out, they are 38mm deep. Delivery would take about a week as we would need to order these in.

Looking to control 4 x sets of lights - can this be done from 1 remote controller?
I believe in theory it is possible due to the radio control, but it is not something we have tested as of yet.

Do these need a driver?
Power supply (driver) is supplied and comes with a 3 pin plug.

Can you set these lights to all one solid colour as well as colour mood lights?
Yes using the remote they can be set to one solid colour.