Better than cheap deck lights these small (12.5mm diameter) plinth lights are sold as a starter kit to which you can add further heads to suit your project.

The starter kit has 4 LED heads and a 3.6 watt DC LED driver (power supply). We offer this in two colour tones; warm white and a cool white. As a guide we suggest the cool white on white, grey and slate floors and warm colour on warmer coloured floors including wood.

The .7mm thick brushed stainless steel bezel is strong, yet does not project too far from the mounting hole. steel and available in 2 colour temperatures - white or warm white.

Additional heads can also be bought to add to your kit. A maximum of 10 heads can be used on one power supply.

Easy to install - Just plug and play each plinth light into the other. Perfect for kitchens and walkways where added light and guidance could be needed. Low energy and cool running temperature - these fittings only use 0.2w each.

Dimensions:
Drill hole size: 10mm.
Power supply output cable length: 1.0 metre.
Each LED head has a 150cm lead - making it possible to space LEDs up to 3.0 metres apart.

Lamp Type	Long Life LED Light Source
Lamps Included	Yes
Dimmable?	No
Width	13mm
Length	28mm
Cut-Out Diameter	10mm
Construction	Stainless Steel
Wiring Details	Class 3 - Requires a low voltage supply
Driver	Includes integral driver/transformer suitable for 230 - 240v supply

Do these have a UK plug on them and can you incorporate a PIR?
This doesn't come with a plug, the PIR would need to be wired between the power source and the driver.

If I use a bigger driver, any problems with daisy-chaining more than 10 lamps? I'm replacing a set containing 16 lamps
We believe the driver provided in the kit would power 16x fitting. The only issue we envisage is possible voltage drop.

what is the IP rating of these lights?
These are IP 20 - they are not designed for use in wet areas or outside.

Is this kit direct to 240v or is there a driver supplied?
A power supply is supplied, Which can power up 10 lights if required.