This is a round colour changing downlight at a great price, the engineering quality is top notch with a choice of chrome, brushed chrome, or white finishes.

The perfect mood enhancement for home or exterior area. Ideal for use in the bathroom, soffits or as your everyday downlight in the kitchen, living area, bedroom the list goes on.

Containing the latest in colour changing LED technology providing infinite adjustment of speed and colours - up to 1.2 million static colours all of which are dimmable down to 10%.

CCT by use of the remote you are able to select the colour temperature of the white mode, from soft warm white (2700k) all the way to Daylight white (6500k)

The lamp has a life span of approximately 50,000 hours.

Although this fitting requires a remote control for use, if it is fitted as part of your mains wall light switched circuit it will resume from its last known state when switched on.

The receiver is built into the lamp, Unlike older IR RGB lamps where you would need to hold the remote close to the lamp. This Elite lamp uses RF (radio frequency) with a multi-directional remote, this means the remote would change the colours easily anywhere in the room. We've tested this, we managed to keep changing the colours in a different room.

Each lamp can be paired to one of eight lighting channels. This allows individually switched scenes within a room can be controlled by one remote.

The kit consists of a colour change lamp, Downlight with a GU10 lamp holder. You are only going to need one remote control so just order one kit complete with remote as below, and then as many additional kits as you require without the remote. Simples.

Remote holder supplied, so no chance of losing the remote. Easy lamp change - just twist off the bezel.

To Sync (link) - Turn the lamps on and triple(3) press the zone button you wish the lamp(s) to be assigned to, to unlink press the zone button five(5) times.

We also list the downlight individually. This allows you to install a normal white LED or halogen lamp and have them match the style of your colour changing fittings.

The optional gateway smart controller enables you to control the lights via Alexa and Google and the app via your home wifi network.

Quick Sync Guide:

Sync a zone - power on at the mains, press the corresponding zone button 5 times in quick succession.
Unsync a zone - power on at the mains, press the corresponding zone button 10 times in quick succession.
Control all zones - hit the M (master) button.

Cut-out Diameter:
64mm

Overall Diameter:
84mm

Number Of Lamps	1
Lamp Type	GU10 Base Mains Lamps
Lamps Included	Yes
Dimmable?	Yes - on standard dimmer (TRIAC or leading edge)
Max Wattage	50w
Total Wattage	6w
Diameter	84mm
Suggested Void Depth	100mm
Cut-Out Diameter	64mm
Construction	Aluminium
Wiring Details	Class 1 - Requires an Earth Connection
IP Rating	IP65

Can you email me pictures of the type of controller used to have individual zones to control these rgb lights thank you , kind regards Paul
The controller is shown on image 5 of the listing

Hello. Is this fire rated suitable for use within a domestic bathroom?
This fitting is not fire rated however it is suitable for a domestic bathroom

Are these lights compatible with dimmable Smart switches? For example Lightwave, or do they only work with on/off wall switches?
This fixture is controlled with the remote control and has to be wired with an on/off wall switch only. So unfortunately no, it will not work with a Smart switch.

What accreditations do these have? e.g. I.E.E. wiring regulations, CE accredited?
These will be CE or CE-UK marked and come with full instructions. They meet and exceed any requirements set down IEC 60598-2-1, IEC 60598-2-2, and are certified by the manufacturers' own IECEE CB Scheme. As for wiring regulations that's for the installer who should work to BS 7671 and the 18th Edition IET Wiring Regulations.

Are these rated for external use?
These are suitable for outdoor use. IP65 rating gives it protection against jets of water.

My soffit is 6 meters high. Will the light shine all the way down to the ground?
Yes - the bulb supplied would be sufficient.

Can you have different colours in different zones? E.g 2 lights white and 2 lights blue (or whatever)
Each lamp has an integral receiver. You can assign a lamp to a group and set the colour of that group. You can operate up to eight groups, so short answer, yes, you can.