These wall recessed light fixtures are specifically designed to provide low-level lighting in corridors, hallways and on staircases.

The hidden design makes the most of your architecture but the seamless integration does require a little planning so that necessary works are built-in when constructing or remodelling your space.

Featuring an oval face, the light is angled down and no glare from the LED lamp nor housing detracts from the light effect.

Dimensions of the oval recess once fitted are height: 48mm, Width: 34mm.

Light is provided by a 1W LED lamp with an output of 80 lumens. The LED casts a warm white (2700°K) light.

Requires a 75mm x 45mm hole to be cut into your plasterboard.

An LED driver is required for use - operating without one will irreparably damage your lights. When installing two or more fixtures on a single driver the wiring must be made in series.

View more items from this supplier

Lamp Type	Long Life LED light source
Lumens Per Watt	80
Lamps Included	Yes
Dimmable?	Yes - when using the specified equipment
Total Wattage	1w
Width	34mm
Height	48mm
Construction	Plaster
Wiring Details	Class 3 - Requires a low voltage supply
IP Rating	IP20
Kelvin	2700°K - Soft Warm White
Driver	No driver or transformer is supplied with this fixture (sold separately)
PDF Document(s)	Measurement Diagram Instruction Sheet Datasheet

Do the lights have bulbs which can be changed by hand without the need for an electrician?
No lamp as such is used as this fixture has a built in LED that will give on average 36,300 hours operation so nobody should have to reach for the screwdriver for several decades.

Are these fitting suitable for a solid brick wall ?
These need to be plastered in, so unfortunately not.

is the cost each or for a group?
The price is for one light, these also require a driver to power them, If you need help please give us a call.