Decorative Adjustable Spotlight for Tension Wire Lighting Systems - 3 Finishes
Chrome, black or white - Stylish practicality and low glare
Product Ref: 1765From £54.43 inc VAT
A two-part adjustable spotlight for use on tension wire lighting system. The front of the lamp sits in a baffle that reduces both 'rim spill' and glare, making this great for domestic environments and equally good for lighting artwork.
Thermally tested for extended use with halogen lamps up to 50 watts, but also accommodates most if not all Gx5.3 base 12 volt LED lamp (including those with a longer body)
Offered here in polished chrome and black or white polyester paint finishes.
Adjustable, Offers 350º rotation and 90º tilt. This allows you to direct the light exactly where you need and require it.
The distance between the cables under tension should be around 155mm centres for this fitting.
Designed for MR16 low voltage lamps up to 50w, contact us if you need assistance on lamps, wattages and beam angles.
|Number Of Lamps||1|
|Lamp Type||MR16 - 12v Halogen Reflector|
|Part L Compliant Luminaire||No|
|Dimmable?||Yes - when using the specified equipment|
|Wiring Details||Class 3 - Requires a low voltage supply|
|Driver||No driver or transformer is supplied with this fixture (sold separately)|
Is it possible to add hanging pendants to the suggested tension wire tracking ....if the 4 spotlights are not enough? Am I able to add ANY pendant?
What IP rating is this spot?
Would these fittings take LED lamps?
I have exisitng, installed tension wire lighting but would like to replace the lights with WIM181080. Could you advise if all these systems are the same width in terms of the distance between each of the wires?
What would be the ideal transformer to use with the strosmr16 tension wire system, with up to 5x 50w lamps in the system?