Small Recessed Shallow Profile IP65 Spot
Round or Square Option
Product Ref: 41139From £42.00 inc VAT
A small shallow profile spot light ideal for areas where a tiny fitting is needed for a big impact. Ideal installed in niches and alcoves, to highlight those important ornaments or beloved possessions.
Available in a square or round shape, and with a choice of polished chrome or stainless steel 316 there is sure to be one to suit your requirements.
IP65 rated for use in bathrooms or outdoor areas, with protection from sprayed water. Use in shower areas or for path lighting.
Complete with an integral 1w High Power LED, 3000k, with a 120º beam angle. Perfect for energy efficiency.
Due to their size these luminaires do not have space for an integral power supply. They must be used with a 350mA constant current driver (power supply).
1w-9w 350mA LED Power Supply - Suitable for 1 to 9 fittings.
1w-2w 350mA Ultra-Compact LED Driver - Suitable for 1 to 2 fittings.
Dimmable 1w-18w 350mA Constant Current Driver - 1 to 18 fittings. 1 - 2 fittings can be dimmed, but there is a slight buzz, which is why we recommend using 3 or more fittings.
|Lamp Type||Long Life LED light source|
|Dimmable?||Yes - when using the specified equipment|
|Wiring Details||Class 3 - Requires a low voltage supply|
|Kelvin||3000°K - Warm White|
|Driver||No driver or transformer is supplied with this fixture (sold separately)|
What is the length of the wire attached? Are they suitable for bathroom zone 1?
Are there any other dimmable ip65 spots that match the round one as i only need one that is shallow profile?
I want to fit 7 of these and have them dimmable, what a would I require for the full installation?
Is it possible to use the 350MA 3W ULTRA COMPACT LED DRIVER for one fitting?
I would like to buy this light for my shower niche. I’m located in France and I need only 1 light. Which driver would you recommend to use?
I would like this light fitted into my new wetroom. How does electrician install them? What wiring will I need to ask for?
Is he ULED09T dimmable?
I WANT TO FIT ONE OF YOUR LIGHTS ( REF 41139 ) IN A NICHE IN MY NEW BATHROOM , OBVIOUSLY THE UNIT FITS BY PUSHING IT INTO THE HOLE IN THE TILE , HOW EASY IS IT TO REMOVE IT IF I EVER NEEDED TO.
I have a 500 mm wide x 1400 mm high x 300 mm deep alcove in a small bathroom. Can you suggest a suitable light to make it a bit of a feature?
I'm interested in buying 2 of these IP65 spots to go into a recess in a tiled shower cubicle, much like the picture on your website. I see from the notes that I need a "Driver or Transformer". Your web page specifies "ULED09T" and "MIK2031". Can you confirm whether I need both of these items, or if it's a case of one or the other.