www.lightingstyles.co.uk
01780 767 617
Product Ref: 52330
£97.00 inc VATHere is an easy to install trimless downlight for use in new ceilings or in areas where a plaster skim is to be applied. Provide a neat and discrete built-in look.
Installation is relativity easy... Cut a round/square hole. Install the top hat housing in the hole and fix the perforated rim to the plasterboard. Plaster with a skim coat to the circular bead, paint then install the rear housing, lamp and retaining bezel. Full instructions are provided in the PDF document.
Available in round or square, White finish which is easily painted.
Offers a 30° tilt from horizontal. The deep lamp recess reduces glare for a soft lighting effect.
Round
Height 74mm x Diameter 74mm
Cutout 80mm
6.8w, 2700k LED lamp supplied
528 Lumens, 37º Beam angle
Requires driver
Square
Height 80mm x Diameter 93mm x Width 93mm
Cutout Length 95mm x Width 100mm
6.8w, 2700k LED lamp supplied
544 Lumens, 35º Beam angle
Requires driver
The drivers recommended can power 1 fitting.
Lamp Type | Long Life LED Light Source |
Lamps Included | Yes |
Dimmable? | Yes - on standard dimmer (TRIAC or leading edge) |
Max Wattage | 6.8w |
Construction | Zinc |
Wiring Details | Class 3 - Requires a low voltage supply |
IP Rating | IP20 |
Kelvin | 2700°K - Soft Warm White |
Driver | No driver or transformer is supplied with this fixture (sold separately) |
PDF Document(s) | Instructions |
Be the first to ask a question about this product! |