Flexible LED Lighting Tape - IP65 RGB
Can be used with a Friendly Remote
Product Ref: 6123From £17.72 inc VAT
This IP65 Rated RGB flexible LED lighting tape is perfect for exterior environments. Designed to achieve homogeneous, continuous beams of light.
IP65 rated proving the added benefit of a silicone housing, allowing this to be used in wet areas, such as the bathroom or outdoors.
Sold Per 1000mm or in a 5000mm reel.
14.4W LED Tape
840 lumens width 12mm and cut every 100mm
24V Driver and heat sink profiles are essential for this tape.
Everything you need can be found below by clicking this link. In this section you will find profiles, drivers, remote and receivers. Please make sure when selecting a driver that the driver has an IP67 rating.We appreciate integrated lighting with LED strip can become complicated, especially for large installations, if you require any assistance please give us a call.
|Lamp Type||Long Life LED light source|
|Dimmable?||Yes - when using the specified equipment|
|Wiring Details||Class 3 - Requires a low voltage supply|
|Kelvin||3000°K - Warm White|
|Driver||No driver or transformer is supplied with this fixture (sold separately)|
Can I confirm that the Led chips are a 4 in 1 chip as shown in the pictures and not and RGB chip and a separate warm white chip?
Am interested in putting 3 tapes in a bathroom, one running length of bath panel the other two in small cut outs on wall
Are these permitted in zones 1-3 ?
If I want to colour change will the receiver still work if mounted in loft above ?
Two small lengths will be approx 300mm do you supply this length or can/how can they be cut?
Are the lengths fitted with a flex lead & how long is it ?