Have you cut the hole too big? Need to replace a large old fashioned mains R63 or R80 downlight? This is the easiest and most modern answer to your dilemma.

This solution uses a dedicated LED COB fixture and an oversize bezel making it suitable to cover holes left by large older style downlights. Will work with existing apertures (holes) from 63mm up to 130mm.

The LED light component uses a 7w chip to generate either:

Warm White 3000°k - 460 lumens

Neutral white 4000°k - 490 lumens

The built in reflector provides a 38º beam making it a valid alternative to a 50w halogen lamp. Over 30,000 hours lamp life.

The LED light component also makes use of an intumescent seal to provide fire protection. In the event of a fire or high temperatures, this substance swells and stops fire from entering the ceiling void for up to 90 minutes.

Offered in three finishes - white, polished chrome or brushed chrome. (please note: Chrome will also come with a chrome inside.)

Note that photographing polished chrome is notoriously difficult as it has a mirror finish!

IP65 rated so dust tight and offering protection from water projected from a nozzle. This is a downlight that could be installed in many areas in the home especially the bathroom.

Complete with LED driver which is fully dimmable on most leading and trailing edge dimmers that can handle the lower loads of LED lamps.

We also offer a dimmer module that will replace the dimmer inside your switch plate if your existing dimmer is incompatible.

This will operate a single downlight or a larger quantity (max 20 units).

Lamp Type	Long Life LED light source
Lumens Per Watt	66
Lamps Included	Yes
Dimmable?	Yes - on trailing edge (reverse phase dimmers)
Total Wattage	7w
Width	180mm
Suggested Void Depth	110mm
Construction	Metal
Wiring Details	Class 2 - Double Insulated - Requires no Earth Connection
IP Rating	IP65
Driver	Includes integral driver/transformer suitable for 230 - 240v supply

What is the warranty period on these units?
The warranty period is two years but when using LED lamps there is little chance of heat or UV damage which is the only factor that would ever make these fail.

Is this 1 light fitting or a pack?
This is for one light fitting.

Do you have any recessed downlights that will work for an existing aperture of approx 150mm suitable for a bathroom.
Product ref 6149 is our largest oversized downlight that is IP65 rated. It has a cut out of 140mm max. Alternatively you could look in our bathroom lighting section for ceiling fittings that may work: https://www.lightingstyles.co.uk/bathroom-lighting/bathroom-ceiling-light-fittings

If the lamp is not replaceable, will I have to replace the entire unit when the lamp fails, or is there another way to cope?
Yes, the lamps are extremely long life so will last 10 years+ but once they fail the unit must be replaced.

Can you advise of the output of these lights in Lumens?
The lumens output of these lights is 460.

Is it easy to fit three of these lights - short distance from one another in a bathroom ceiling - plastic cladding?
Yes it should be easy. Just cut the hole (if you haven't already got one) and the fittings are held in by their spring clips.

What is the colour temperature of the LED (eg, 2700K, 3800K, 6000K)? Is the lamp element replaceable? If so, what is its outline (eg GU10, E14)?
This is a warm white LED (3000k). The LED chip inside this is not replaceable, but does have a very long lamp life.

Does this run from 240 mains? Is it suitable for showers?
Yes this fixture just requires a mains supply. It has a high ingress protection of IP65 so is jetproof and suitable for use in a blow-your-socks-off shower enclosure.

Replacement Downlight for R63 & R80 Fire & IP65 Rated - COB LED

Mains, Dimmable, Fire Rated & Suitable for Bathrooms

Related Products

Elite HD 7w COB LED Fire Rated Tilt Downlight

Elite HD 7w LED Fixed Fire Rated IP65 Downlight

Related Categories