High Output LED Cabinet Lighting - 12v
Housing Available in Four Styles
Product Ref: 5548From £10.68 inc VAT
If you want more light then these 12v LED lights are the solution the light output from these fixtures is broad and gives 320 lux at 0.5 metres and 110 lux at 1.0 metre. That is 50% brighter than any 20w halogen fixture.
The range comes in brushed stainless steel and you can choose between:
Round - Fully Recessed
For use in kitchen cabinets (top or bottom) or in flyover panels
61mm Drill bit required.
Round - Surface Mounted
The LED is housed in a low profile housing 14mm deep and 68mm in diameter.
Square - Surface Mounted
As the above but square measuring 66mm x 66mm.
Triangle - Surface Mounted
Typically fixed at the rear on the underside of cabinets
125mm wide and 47mm deep
All designs are available in a choice of colour temperatures:
3000ºk (warm white) light output enhances the colours of warm tones and wood materials
5000ºk (cool white) light output enhances the colour of white, blue, black and silver materials
These high output LED under cabinet lights are suitable for recessing into furniture. This makes them suitable for flyover pelmets and for use in the top of kitchen cabinets. They can be used on the underside of cabinets only if you are competent enough to cut a rebate 10mm deep into the carcass with a plunge-cut router.
The lights are made from steel with a brushed stainless steel finish. They are pre-wired with 2000mm flex.
2 watts per fixture.
12V CONSTANT VOLTAGE DRIVER is required to operate this product - a selection of suitable power supplies are listed below.
|Lamp Type||Long Life LED light source|
|Part L Compliant Luminaire||No|
|Dimmable?||Yes - when using the specified equipment|
|Suggested Void Depth||10mm|
|Construction||Stainless Steel and Glass|
|Wiring Details||Class 3 - Requires a low voltage supply|
|Driver||No driver or transformer is supplied with this fixture (sold separately)|
Is this fitting dimmable?
The triangular led under cabinet lights. Are they hard wired into mains or is it plug and transformer
How do you get access to the lamp to replace it- do you just pull the circular cover down from the triangular housing? I`m renting and not had to change the lamp yet, and don````t want to break it - when I`ve tried to pull the circular cover it seems very stiff
Are the bulbs in these light fittings replaceable ? If so what type are they and are they readily available ?