Amex users: Your banking app may briefly show a higher amount during checkout. You’ll only be charged the correct total. We’re working to resolve this issue.
www.lightingstyles.co.uk
01780 767 617
Amex users: Your banking app may briefly show a higher amount during checkout. You’ll only be charged the correct total. We’re working to resolve this issue.
Product Ref: 6900
£29.00 inc VATThis constant current LED power supply is dimmable on Triac as well as leading edge and trailing edge dimmers. This means it will allow you to dim your LED fixture/s with a standard rotary wall dimmer, a more sophisticated touch dimmer or a full-blown high-end building control system... as long as you understand the specific requirements of the driver and your dimmer.
The power supply will operate single or a combination of LED loads up to 15 watts. The minimum load is 7 watts, below this dimming may be less flexible than desired.
Most dimmer module needs to operate with an electrical load that falls within a specified range so check the minimum load of the dimmer i.e. if the minimum load is 60 watts it will not work if your load falls below this figure. If require a rotary dimmer to handle a lower load take a look in our accessories section for something suitable.
The dimming range is typically down to 5% and up to 100 % (depending on the dimmer)
Terminals suit connecting cables up to 2.5 mm².
Output voltage is between 20 and 42 volt depending on the load applied.
Lamp Type | |
Dimmable? | Yes - on standard dimmer (TRIAC or leading edge) |
Width | 42mm |
Length | 133mm |
Height | 30mm |
Construction | Polycarbonate |
Wiring Details | Class 2 - Double Insulated - Requires no Earth Connection |
IP Rating | IP20 |
Be the first to ask a question about this product! |