A track available in black, white or satin nickel with a choice of 1 metre or 2 metre lengths.

Track lighting is ideal for use in commercial settings where strong direct light is important such as retail displays in shops, or it can be used in office areas as task lighting, however, it is not limited to use in these areas as it is also perfect for use in the home, kitchens, for example, can benefit greatly from the light that track systems offer, providing light to food preparation areas or as a customisable alternative to standard spotlights

Each length of track is supplied with a dead end and a live end.

Simply screw your track to your ceiling, wire into your mains supply and you are ready to put your chosen fittings on to the track.

There are a number of different fittings and accessories including suspension kits available for the track. These can be found at the bottom of this listing or in the basic mains track category.

This track can be cut to the required length for your project with a mitre saw or junior hacksaw.

Track Compatibility
	Aesthetic Domestic Track System
	Basic Mains Track
	Commercial-Grade 3-Circuit Track Lighting System
	Low Voltage Tension Wire Components
	Luxury Magnetic Light Track 48v
	Signature Recessed Track System
	Signature Single Circuit Track System
	Track for Suspending Pendants

Lamp Type	Not Applicable
Dimmable?	Yes - on standard dimmer (TRIAC or leading edge)
Width	35mm
Height	17mm
Construction	Aluminium
Wiring Details	Class 1 - Requires an Earth Connection
IP Rating	IP20

How have you not put the length of the track in any of the descriptions or More Details sections?
Thanks for your question. If you scroll down on the listing you will see the descriptions under each item which states 1 metre and 2 metres. It’s never been asked but I get your point if you look at the description and specifications you don’t see this. The changes will be made so thank you for pointing this out.

Can this product be cut down as in need it in a 800mm gap?
Yes this track can be cut to suit the length needed - use a junior hacksaw or a mitre/compound saw with a blade that can cut aluminium.

Can the 2m and 1m lengths be joined?
Yes, with a connector accessory.

I am wanting to fit track lighting on the wall & still have lights pointing downwards. Is this possible?
This track can be installed on the wall. We would recommend you check which heads you want to use, as heavy lamp heads are not as suitable.

Can these tracks be suspended from the celling?
There is no suspension solution offered for this track system - sorry

Can this track be cut to length to fit a particular situation or does it have to be used in the full length supplied?
This track can be but to suit your needs. A sharp junior hacksaw does a good job if you do not have a mitre saw.