Miniature Undercabinet T5 Linkable Fluorescent Batten

Are the fixings for these lights available separately? I have some which have been in-situ a few years and are falling down as the plastic fixing is worn.
Fixing come complete with the lights, Seperate fixings, however, are not.

Hello, can these lights be dimmed?
This fixture is non dimmable.

Can you link the 1204mm T5 28w Slimline Fluorescent Battens with link leads?
Yes the fittings can be connected by link leads which can be purchased on the same listing.

Are these lights suitable for direct connection into a mains lighting circuit fused at 5 Amps.?
Yes this is a typical installation.

How long is the whole light including the connectors? I need to know an overall length including the push-in lead before the cable flex to see if it will fit under my kitchen cabinets.
When the power lead is inserted, the connector adds 40mm to the length, if you use a link cable the connector for this adds 46mm to the length

Can I buy longer power lead ? I though i saw an option when i ordered the lights but cannot find them. I need 1m long power lead
There is no option for a longer power lead. You can of course extend a lead with an extension lead - see the bottom of this listing.

Can these units be chained together by link leads, or do they each need a seperate feed from a junction box or plug.
Yes you can link these fittings together using link leads. Each fitting is supplied with a link lead.

Can these be wired in to electricity?
Er, yes they will require an electrical connection. The push in lead is normally wired into a fused spur however you can put on a three pin plug and operate via a wall socket if that suits your needs better.