A simple wall light, with spun metal reflector in pastel and monochrome colours which takes inspiration from a traditional look. A knuckle joint allows rotation and tilt away from a wall - position the light exactly where you want it.

Supplied with a 1.8 metre flex with a switch for easy, on/off functionality. The fixture can be hard-wired to a mains supply or you can attach the trailing lead so the fitting can be plugged in to the wall.

Suitable installed in industrial or minimalist interiors, either side of a bed or by a reading chair. The back plate measures 110mm in diameter.

Available in a choice of four finishes, black, white, green or beige (sadly some colours are now discontinued). Perfect to add that additional splash of colour into your home.

Each wall light has a white interior to help produce a downwards light.

Designed for an E27 Edison screw mains lamps up to 60 watts. Can be used with energy saving LED lamps.

A matching pendant is also available to match the interior of a room, these can be seen below.

View more items from this supplier

Number Of Lamps	1
Lamp Type	E27 (ES) Base Mains Lamps
Lamps Included	No
Dimmable?	Yes - on standard dimmer (TRIAC or leading edge)
Max Wattage	60w
Height	200mm
Diameter	155mm
Depth/Projection	190mm
Construction	Metal
Wiring Details	3-Pin Plug Included
IP Rating	IP20

Does the ball joint allow the light to swivel sideways as well as in the vertical plane?
The ball join only goes up and down, however it can be rotated left and right via the swivel at the base.

I just wondered if this wall light swivelled all the way up so that it could be an uplighter?
This fitting can move 90 degrees, and so can be adjusted slightly, but cannot be moved all the way up as an uplighter.

Does the metal casing get hot? This is for a child's reading light so cannot be hot to touch.
This can be used as a childrens reading light, I would recommend using a LED lamp inside, as these do not get hot.