We’re taking a sensible approach to the evolving situation with Coronavirus by following all Government advice to make sure we can continue to serve our customers and protect our people.
Programmable LED Floodlight with Microwave Movement Sensor
Wattages 10w, 20w and 30w
Product Ref: 51539From £26.92 inc VAT
Remember halogen floodlights with PIR movement sensors? They were okay but not exactly reliable and the high running costs and short lamp life meant getting the ladders out a little too often.
Welcome to the future:
LED - These floodlights use LED chips arranged in an array. They don't generate the heat associated with halogen and they have an operating life of around 50x that of the explosion prone filament lamp.
Microwave - Microwave sensors have a higher sensitivity and higher coverage range than most PIR sensors, have a continuous field of detection and are suitable for larger areas.
To use the full functions of this floodlight a remote is required.
Remote Control - You can switch the lights on or off as required but better still you can adjust the sensitivity and time period from the ground to get the lights working how you want.
Sensitivity has 4 pre-set levels from 25%-100%; distance 1.0m - 8.0m. Time ‘ON’ has 12 pre-set from 5 seconds to 24 hours. 8 more pre-set modes are offered to chose how dark it needs to be before the sensor is active.
As the remote can control more than one fitting we are selling them separately. Remote operates via infrared.
Manual override facility.
Microwave Sensor 10w LED Flood Light
High output of 1150 lumens of neutral white light. 4000°k.
Projection: 80mm Height: 90mm Width: 34mm Length: 130mm
Microwave Sensor 20w LED Flood Light
High output of 2240 lumens of neutral white light. 4000°k.
Projection: 87mm Height: 126mm Width: 28mm. Length: 180mm
Microwave Sensor 30w LED Flood Light
High output of 3100 lumens of neutral white light. 4000°k.
Projection: 95mm Height: 147mm Width: 37mm. Length: 210mm
There is no driver in these fixtures - only a mains electrical connection is required.
Complete with all fixing accessories and pre-wired with 1000mm rubble cable.
Supplied with or without a remote control.
If I was to turn the light on by remote would it automatically go off with the time delay that's set or could I have it on for as long as I wanted?
How long is the lead and does it come with a plug?
When mounting at double height (to replace a 500w halogen floodlight) can I adjust time, lux and sensitivity from the ground?
What power LED will give a similar amount of light to my existing fixture?
what is the range of the remote controller, will it work from indoors as an override