This is a long drop, 6-ring, concentric, circular wheel, pendant. Each ring is held in place with braided stainless steel wires which can be adjusted at the time of installation allowing you to hang the rings at the angles you desire making your fitting truly unique. Fantastic for large atriums or living spaces, a large pendant in such a contemporary style like this is hard to find. One of the images shows the fitting from underneath (looking up) which was installed in a large atrium and looks stunning.

The overall diameter of the fitting is 850mm and the longest drop is 3200mm (3.2 metres), the drop can be reduced at the time of installation to suit your ceiling (to a minimum drop of 1400mm). It is a long drop fitting suitable for big spaces.

Fitting includes a series of integrated LEDs at 150 watts and a lumen of 8400.

Ring sizes: 85cm, 75cm, 60cm, 45cm, 35cm with the smallest at 25cm.

Ceiling rose dimensions:
Diameter of the top part 290mm
Diameter of the visible plate 330mm
Height 70mm

This is a best seller and we try to keep a good stock of these lights in our warehouse so lead time can be as little as 1-2 days, if you wish to check stock please call the sales team on 01780 767617.

Important: this fitting requires time and consideration from you, or your electrician when installing. Customers will need to consider this when purchasing, the suspensions need to be adjusted to allow the circles to hang as preferred. This is the beauty of the fitting, it is design is to be customised at the time of installation. Each ring has 3 suspensions - adjust the length individually so the rings hang straight or at an angle.

Comes with our own information sheet that explicitly details how to install this light fixture quickly and without too much head-scratching, following this will ensure the wires do not become tangled. If you are unclear or need reassurance please call us.

Weight 6.6kg.

Lamp Type	Long Life LED Light Source
Lamp Lumens	4500
Lamps Included	Yes
Dimmable?	Yes - on standard dimmer (TRIAC or leading edge)
Total Wattage	150w
Suspension	3200mm
Adjustable Height	Yes – at time of installation
Construction	Metal - acrylic and chrome finish
Wiring Details	Class 2 - Double Insulated - Requires no Earth Connection
Kelvin	3000°K - Warm White
Driver	Includes integral driver/transformer suitable for 230 - 240v supply
PDF Document(s)	View PDF

Hello, could you let me know how much it would cost to deliver this to Northern Ireland please? and/or the Republic of Ireland? Also, how long will the LEDs last in this? are they replaceable? Thank you so much. Annette
Delivery to Northern Ireland would be free, ROI would be £20.83 The LEDS are not replaceable but would last around 25,000 hours.

I note that the integrated LED’s cannot be changed. What is the working lifespan of the LED’s?
The LEDs are rated for 25,000 hours. At this time over 50% of the LED chips are going 80% of their original light output. The LED driver in the ceiling plate is easy enough for the end user to replace, whereas the LED strips used in the rings can be replaced by the manufacturer.

Where do we buy replacement bulbs from
Unfortunately this fitting has integrated LED's which cannot be changed.

Can a remote emergency pack located above the ceiling be connected to this light fitting, if so can you recommend a suitable type?
Unfortunately, we cannot advise on emergency lighting conversion kits as it is not something we currently offer.

What is the overall weight of this fitting?
6.8kg.

Could you please tell me the height this would be when hung - the longest possible height?
Out of the box the longest drop is 3200mm

Can you let me know if this fitting is dimmable?
Yes, this fitting is dimmable.

could you tell me the width of the widest circle please.
Each ring from the largest measures 850mm, 750mm, 600mm, 450mm, 350mm to the smallest at 250mm. The largest being 850mm.

What is the lumen output?
The lumen out put for this fitting is 8400.

Please can you tell me the diameter of the ceiling mounting plate?
The diameter of the top part: 290mm x Diameter of the visible plate: 330mm x Height: 70mm.

Would this be suitable for a slanted staircase ceiling?
We would not recommend this fitting to be installed on a slanted ceiling. It is quite heavy and the angle of the ceiling will cause different stresses on the wires, compared to if it was installed on a straight surface.