This 1.5m pull cord switch comes pre-assembled in a range of finishes, paired with a matching cord tip and corresponding cord. This pull cord will replace an old ceiling-mounted switch that has become frayed, dirty, and frankly just lets your new swish bathroom down. Available in these finishes:

Brushed Chrome
Polished Chrome
Metal Matt Black
Anthracite
Black Nickel
Antique Brass
Matt White

Suitable for 1 & 2 way circuits.

Easy installation as this unit only requires an incoming live and outgoing switch live connection. How most pull cord switches are wired.

Dimming versions - Information

This is a trailing edge dimmer built into a standard ceiling pull switch. You can select any light level by simply pulling on the cord and holding until the desired light level is attained.

Maximum loads by Lamp Type:

Dimmable LED downlights - single or multiples from 5 - 100 watts
LED dimmable bulbs from 5 to 100 watts
Mains & 12v tungsten lamps up to 150 watts.

A built-in potentiometer enables fine-tuning of the dimmer to remove any flickering.

Lamp Type
Width	74mm
Depth/Projection	36mm
Construction	ABS Polycarbonate
Wiring Details	Class 1 - Requires an Earth Connection
IP Rating	IP20

Thank you for pointing me to this product. Can you confirm the make please? I don't want a Knightsbridge. Thanks
Knightsbridge

Can you change the cord and knob. Or is it a fixed unit
It can't be changed very easily I'm afraid

Hi Can you please tell me what material this item is made from, are all the finishes made from plastic? Many thanks
The fittings are made from a mixture of thermoset resin and steel.

Does this light have an IP rating? A pull cord switch is needed for zone 2 in a bathroom, so need an IP44 or above.
This is rated as IP20 so would not be suitable for zone 2.

Can you please tell me (maybe have a bit of a pull if you have them in the showroom?) whether any of yours are quiet/silent. I know the dimable ones seem to have silent pulls to them but I`m not sure if this will work with a single ceiling rose given that most bulbs nowadays seem to be lcd or similar?
This pull cord gives the noise you would expect from a pull cord. The dimming pull cord is virtually silent but is only going to operate with a dimmable bulb. From personal experience We know Volex used to produce pull cords that were much quieter than others on the market. That said reviews of there latest offering seem to suggest it gives a loud click.

When you replace the ciling pull cord do you have to touch the electrics? We need ours changing as cord now dirty but we are no good with electric wires. Can you advise please.
Inside your existing bathroom pullcord you are likely to find two wires; the live and the switched live. It is not difficult to replicate the wiring in your new pullcord but if in doubt you should find an electrician who is happy to do the work for you.

Ceiling Mounted Pull Cord Switch - Multiple Finishes

Perfect for bathrooms 10Amp 2-Way

Related Products

Screwless Bathroom Fan Isolator Switch - 5 Finishes

Bathroom Fan Isolator Switch

Related Categories