Basic Components For Single Circuit Track

Here you will find a range of basic components for use with our single circuit pendant track systems allowing you to feed power to the track, provide an electrical and physical connection between two lengths of track and terminate the electrical feed at the end of a system.

Components are as follows:

Single Circuit Track End Feed
A mains electrical feed in point for track systems.  These slide into the end of the track - ideal if the wiring is located at the end of your installation, 

Single Circuit Track Connector with Mid Feed Capability
If you cannot power your track from an end you may wish to consider this feed; where a mains electrical feed in point can be made between two tracks lengths.

Direct Connector for Single Circuit Track
Provides an electrical and physical connection between two lengths of track with minimal increase to the overall length of the system.

Flex Connector
Form corners or bends between two lengths of track. Provides an electrical and physical connection.

End Caps for Single Circuit Track:
Allows you to safely terminate the electrical connection at the end of a length of the track.

The diagrams show track configuration when viewed from above.

Additional components are available including a Pendant Adapter and Complex Joints