This cast and turned aluminium spotlight is a more technical looking product for use on our 12v tension wire system. Rated for use with a 35w lamp but can use 20w lamps if you need less light. This fitting has 350º rotation and 90º tilt allowing you to direct light exactly where you need it.

To use this product your wires must be spaced 100mm apart.

These spotlights are great for directing light where required and can be used on the tension wire system in a kitchen, utility room, study or living space - a great way of creating light where you want it.

Sadly discontinued and we only have a few remaining for sale but they can be combined with other spots on a tension wire system to mix up the design.

Number Of Lamps	1
Lamp Type	MR16 - 12v
Part L Compliant Luminaire	No
Lamps Included	No
Max Wattage	35w
Width	55mm
Height	125mm
Construction	Aluminium - Anodised
Wiring Details	Class 3 - Requires a low voltage supply

Can this spot be used with 20W halogen bulbs, 8 spots on the 6m long run, 200W Transformer.
Yes, this would work as you are meeting the minimum and not exceeding the maximum loads. A 6 metre run is also good, as is not too long to be powered.

What is the wire system/power supply etc that goes with this lamp.
These fittings are designed for use with low voltage tension wire systems, all necessary components and information can be found in the track lighting section of our website.

Can these be used in bathrooms? I have a vaulted, beamed ceiling in my bathroom and it's being refitted for a shower. I have no idea how to overcome the lighting issue without these
Outside of bathroom zones 0, 1, & 2 you can pretty much use whatever you like. But you have to be conscious that high humidity will cause problems. You`d be better off calling and discussing your needs with us so we can find the best solution for your space.

Can I buy led lamps instead of halogen lamps to go with this wire system?
You could use LED lamps in these fittings but you have to be careful about under loading your transformer. These wire systems tend to use a toroidal transformer and you should always be working to 80% capacity. This basically comes down to how many fittings you are intending to use on your system.

What is the spacing of the wires for the Technical 12v wire spotlight
The wire spacing for this fitting is 100mm.

Is the spacing of the wires fixed and if so, what is it ?
A cable spacing of around 100m should be used with these lights

I am wanting a fitting for a wire system that is able to be placed so the light is shone up to an apex of a vaulted ceiling, would this spotlight be able to do this?
The issue with positioning any luminaire `above` the actual tension wire is that you are shifting the centre of gravity outside of the stability zone. This means that the head will be unstable and will be almost impossible to orientate as you desire, a situation which is only exacerbated if you choose a luminaire with a heavier head (as per this fitting).