IP67 Rated Low Level Recessed LED Spot

Name: IP67 Rated Low Level Recessed LED Spot
Brand: Lighting Styles
SKU: 7118
Price: 17.98 GBP
Availability: InStock
Rating: 9.2 (9 reviews)

Stainless Steel with Either Blue or White LEDs

Suitable for Zone 0 - protected against immersion in water

Class 3 - This fitting is low voltage and will require a transformer or driver.

No driver or transformer is supplied with this fixture (sold separately)

Product Ref: 7118

£17.98 inc VAT

Description

Rugged stainless steel (grade 304) LED marker light containing 4 LED chips.

The heavy construction makes this suitable for high traffic areas or locations where spilled liquids are common, ideal for use at low level or where a subtle light is desired.

Details

Bezel Diameter: 36mm Height: 2mm
Housing Diameter: 29mm
Depth: 65mm (including waterproof cable entry)
Toughened frosted glass
Available with white or blue LEDs each fitting 0.5w.

Please note A 24v DC LED driver power supply is required and is not supplied with these fittings. Maximum of 12 fittings can be operated on this power supply (see under variation for compatible power supply). These are to be wired in parallel only.

Note: this fitting will require fixing in place with silicon, tile adhesive or floor adhesive. No fixings or clips are supplied.

Prewired with 3000mm flex

IP67 rated protection from projected water and dust tight

Ideal for bathroom or external use.

4 LEDs with a 45 degree beam angle.

Specification

Lamp Type	Long Life LED light source
Part L Compliant Luminaire	No
Lamps Included	Yes
Dimmable?	No
Suggested Void Depth	80mm
Cut-Out Diameter	30mm
Construction	Stainless Steel and Glass
Wiring Details	Class 3 - Requires a low voltage supply
IP Rating	IP67
Driver	No driver or transformer is supplied with this fixture (sold separately)
PDF Document(s)	View PDF

Frequently Asked Questions

Is the price per light?
Yes, the price stated is for one light.

Are these hard wired or can the led's be un-wired and replaced at the head end?
The LED chips sit on a printed circuit board. This is soldered in place. Replacing the LED chip would be a challenge but not impossible.

I was just wondering what the Kelvin output was on the ML4IPW.
These are 6000k.

Is this warm white or cool white please?
This had a colour temperature of 6000k.

Will one power supply unit, BBSAM13753, supply "no. lighting units, ML4IPB?
The power supply is a 10w power supply, The units are 0.5w, The supply will power 1-20 fittings.

Is this product Zone 1 rated ?
With a high IP rating and being only 24 volts this fixtures are suitable for zone 1 in a bathroom.

Availability: IN STOCK 2-3 working day dispatch