A sleek wall light with a swept back design available in two colours, all with chrome detailing. The head of the fitting is able to be tilted up and down allowing you to direct light where it is most needed. The fitting also has a switch located on the back of the shade allowing it to be switched independently from the rest of the lights in a room.

Please note this fitting comes with a flexed plug which allows you to use in a standard wall plug or you can choose to hardwire the fitting as desired. The diameter of the backing plate is 95mm. The flex is white with the white shade fitting and black with the black shade. The length of the flex is 2100mm.

Suitable for office or home this stylish wall light will provide directional lighting as required.

This fitting is designed for use with a E14 small Edison screw lamp up to 40 watts.

View more items from this supplier

Number Of Lamps	1
Lamp Type	E14 (SES) Base Mains Lamp
Part L Compliant Luminaire	No
Lamps Included	No
Dimmable?	Yes - on standard dimmer (TRIAC or leading edge)
Max Wattage	40w
Total Wattage	40w
Width	260mm
Height	170mm
Construction	Mixed
Wiring Details	Class 2 - Double Insulated - Requires no Earth Connection

How long is the cable that comes with it?
The length of the flex is 2100mm.

What does this item weigh?
These are just a little over a KG.

Where is the switch located on this light? Is it possible for the switch to be located on the flex?
The switch is a toggle located on the top of the shade. Any good electrician could install a switch on the flex for you.

Does this lamp swivel from side to side or just up & down?
The lamp swivels just up and down.

What colour is the flex on the white light - also how long is it?
On the white light the flex is white, all other colours the flex is black. The length of the flex is 2100mm. This can also be removed if you wish to hard wire the product.

Would you let me know the dimensions of the wall plate please?
The diameter of the backing plate is 95mm.

Can i order this lamps without the on/off switch (unswitched) and also can it be supplied with lampholders for E27 bulbs?
Sorry but this fixture cannot be customised.

Could you please tell me which bulb I need to order with this lamp, i.e. bayonet or screw fitting. Also could you please let me know if the 28W low voltage would be suitable for a reading light for a bedroom and equivalent of a standard 40W bulb?
This lamp uses a small Edison screw lamp (SES) they are labelled as E14 (from Edison and 14mm diameter). Yes the 28 watt gives as much light as a 40w and would be a good solution for both reading light and bedside light.