Amex users: Your banking app may briefly show a higher amount during checkout. You’ll only be charged the correct total. We’re working to resolve this issue.
Zone 2 Bathroom Lights
Explore our Search Page showcasing fixtures with an IP44 rating, specifically tailored for bathroom fittings suitable for zone 2. These items also have dedicated categories within Bathroom Wall Lights, Bathroom Ceiling Lights, and more. While designed to meet the requirements of Zone 2, these lights are versatile enough to be used outside this zoned area. The IP44 rating signifies that they are made for areas where splashes of water may occur.
Bathroom Mirror Wall Lights - Opal Glass Globes
4 Options£164.00
Oval Duplex Glass Bathroom Ceiling Light on Drop Stem
2 Options£180.00
Multi-Functional Illuminated Bathroom Mirror 500mm x 390mm
£180.00
Attractive Low Protrusion Ceiling Light - Bright Yet Diffused Lighting For Bathrooms
£200.00
LED Bathroom Mirror with Built-in Shaver & Demister Pad 700mm x 500mm
£225.00
Super Low Profile Illuminated Bathroom Mirror - Touch Sensor Operated
2 Options£290.00
Finest Round Illuminated Vanity Mirror - Fully Adjustable 5x Magnification
£510.00
Low Level Wall-Recessed CCT Guide Light - Waterproof Design
3 Options£25.50
Floating Halo Glass GU10 Recessed Downlight - Chrome Finish IP54 for Bathrooms
£26.50
Adjustable Single Spot Bathroom Light IP44 - 2 Options
2 Options£37.10
Bathroom Spotlight for Walls or Ceilings - White or Black Glass
2 Options£39.00
Chrome IP44 Rated LED Over Mirror Light - Budget Friendly
3 Options£77.30
Compact LED Cylinder Bathroom Light - Chrome & Opal Glass
£79.20
Bathroom Safe Wall Light & Glass Coolie Shade - 3 Options
3 Options£85.00
LED Chrome & Opal Glass Ceiling Light - IP44 Rated for Bathroom & WCs
£91.30
Low Level Cast LED Recessed Light - IP65 SELV
7 Options£100.00
Brushed Chrome LED Wall Light in Art Deco Style - 58cm Length
£107.50
Recessed Low-Level LED Light - IP65 Rated for Bathroom and Stairs
5 Options£110.00
Glamorous Flush Mounted Bathroom Ceiling Light with Drop Crystals
£185.00
Using electrical equipment in bath or shower rooms has always needed care to ensure safety. Now the IEE Wiring Regulations have revised particular zones within the bathroom to indicate what type of electrical equipment that can be installed.
The zones are identified from 0 to 3, with 0 being the wettest.
Zone 0
Lighting in a bath or shower which can hold water must be low voltage and rated IP67
Zone 1
The area directly above Zone 0 limited vertically to 2.25m above the bottom of the bath or shower. Lighting needs protection to IP44 or better, ideally with the transformer located in zone 3 or beyond. We suggest that only low voltage fittings are used in this zone. We do not recommend the use of 240v fittings in this zone but they may be used if a separate 30mA RCD is used to protect the circuit.
Zone 2
The area beyond zones 0 and 1, 0.6m horizontally and up to 2.25m vertically. Zone 2 also includes any window with a sill next to the bath. Lighting needs to be IP44 or better, or SELV with the transformer located in zone 3 or beyond.
Areas Outside of Zone
Previously this was referred to as "zone 3". The area beyond zones 2, 2.4m horizontally and up to 2.25m vertically. The regulations do not specify any IP rating number for areas outside of zones outside of 0,1 and 2 however we would suggest that any 240v lamp that can be touched with wet hands is excluded from this area.