Zone 2 Bathroom Lights
Explore our Search Page showcasing fixtures with an IP44 rating, specifically tailored for bathroom fittings suitable for zone 2. These items also have dedicated categories within Bathroom Wall Lights, Bathroom Ceiling Lights, and more. While designed to meet the requirements of Zone 2, these lights are versatile enough to be used outside this zoned area. The IP44 rating signifies that they are made for areas where splashes of water may occur.
Black Square Frame Ceiling Light with Opal Globes - IP44
£180.50
Ceiling Flush Bar Light with Glass Globes - Bathroom Safe
3 Options£190.00
Bathroom Safe Cascading Crystal Flush Light - IP44 Rated
£194.00
LED Illuminated Mirror & Shaver Socket 600mm x 500mm
£205.00
LED Twin Adjustable Bathroom Spotlight - For Walls or Ceilings
3 Options£207.00
Edge Lit LED Colour Changing Mirror & Remote 700mm x 500mm
£209.70
Bright Energy Saving LED Ceiling Light - Flat Drum
3 Options£215.00
Metallic Grey & Glass LED Flush Mounted Light - IP44
£215.00
Adjustable Square Vanity & Shaving Mirror - IP44 Rated
£228.80
Dainty Curved Arm and Glass Shade Wall Light - IP44
3 Options£235.00
Bathroom Crystal and Chrome Semi-Flush Ceiling Light IP44
£248.00
Bathroom IP44 Semi-Flush Chrome & Opal Glass Ceiling Light
£260.00
Bathroom Safe IP44 Semi-Flush Crystal & Chrome 5 Arm Ceiling Light
£267.00
Wall Fixed Bathroom Magnified Mirror with Light - 5x Magnification
£272.00
Using electrical equipment in bath or shower rooms has always needed care to ensure safety. Now the IEE Wiring Regulations have revised particular zones within the bathroom to indicate what type of electrical equipment that can be installed.
The zones are identified from 0 to 3, with 0 being the wettest.
Zone 0
Lighting in a bath or shower which can hold water must be low voltage and rated IP67
Zone 1
The area directly above Zone 0 limited vertically to 2.25m above the bottom of the bath or shower. Lighting needs protection to IP44 or better, ideally with the transformer located in zone 3 or beyond. We suggest that only low voltage fittings are used in this zone. We do not recommend the use of 240v fittings in this zone but they may be used if a separate 30mA RCD is used to protect the circuit.
Zone 2
The area beyond zones 0 and 1, 0.6m horizontally and up to 2.25m vertically. Zone 2 also includes any window with a sill next to the bath. Lighting needs to be IP44 or better, or SELV with the transformer located in zone 3 or beyond.
Areas Outside of Zone
Previously this was referred to as "zone 3". The area beyond zones 2, 2.4m horizontally and up to 2.25m vertically. The regulations do not specify any IP rating number for areas outside of zones outside of 0,1 and 2 however we would suggest that any 240v lamp that can be touched with wet hands is excluded from this area.