Black Eyelid IP65 Recessed LED Marker Light

This mini LED light performs admirably when recessed in walls inside or out at a low level:

In staircases
We widely specify its use in staircases with deep stringers as the 42mm size is easy to incorporate into the construction and looks great when illuminating wooden, glass and even carpeted treads.

In high-gloss bathrooms and kitchens
This little light looks fabulous at low level in rooms with glass, glossy and high polished flooring and being IP65, SELV low voltage status, means it can be used in zone 1 and 2 in the bathroom.

As a low-level marker
Its subtle light accents walk-throughs in domestic and commercial environments.

LED colour is warm 3000°k with a 50 lumens output - this is not a bright light, it provides subtle low-level light to accent and enhance certain environments.

This light operates on 350Ma constant current LED drivers. The forward voltage is 3 volts.

We strongly recommend you have the light fixtures working in hand to help you decide the best location before cutting tiles or plasterboard. 

A 30mm hole with a depth of at least 40mm is required. If you notch the corners of the hole with a Dremmel or diamond tile bit you can pass the Compact drivers through the hole (these being 34mm on the diagonal. Otherwise, locate the driver somewhere accessible. 

The 2-core flex fitted is 20cm - this can be extended if required.

NB These lights require a 3-volt 350mA supply and must be wired in series when connecting two or more to higher capacity drivers - failing to do so will over-volt and destroy the LED.