We were banging on at our suppliers to provide a really stylish classy and robust shaver light with a punchy energy saving lamp and here is the result... This is an aesthetically pleasing and well designed shaver light with a bowed front and polished chrome finish. With a removable pull cord socket. The shaver socket is hidden behind a chrome door so its out of sight when not required.

Behind the diffuser sits an energy saving 24 watt 2g11 lamp (not supplied) which operates on high frequency flicker-free control gear that offers a further 25%-30% energy saving over standard control gear.

IP44 rated providing protection from splashed water - making it suitable for use in the bathroom zones 2 and 3.

Designed for use with a 24W 2G11 compact fluorescent lamp.

Shaver socket can be used when light is on or off.

View more items from this supplier

Number Of Lamps	1
Lamp Type
Part L Compliant Luminaire	No
Lamps Included	No
Dimmable?	No
Max Wattage	24w
Width	600mm
Height	73mm
Depth/Projection	80mm
Construction	Polished Chrome and Plastic
Wiring Details	Class 2 - Double Insulated - Requires no Earth Connection
IP Rating	IP44
PDF Document(s)	View PDF

We just re-tiled our bathroom and were planning to put small Dimplex heater back on the wall (with pull cord on and off) and then thought (a bit late since tiling done) maybe we could use the wires coming out of the tile for a mirror light instead. Would this use the same wiring or is it more complicated to make such a switch?
An illuminated mirror would typically be wired into the lighting circuit which would be protected by 6 amp fuse or MCB. You can use the wiring in place for the heater (which is likely to be on a fused spur) if you swap the 13amp fuse for a 5amp fuse. If there’s no fused spur you may be wise to speak to an electrician.

Hi, What is the distance between the fixing points please?
We have attached a new picture to the listing which should help.

Are there any wall lights in this range?
This has no family code matching fittings, Though being polished chrome, it goes well with most polished chrome fittings.

Can this light and it`s socket be used in continental Europe (Belgium)? Does an europlug shaver fit into the socket?
This fitting can be used in Belgium, and after speaking to the supplier they have told us that a europlug shaver will fit into this socket.

We need the shaver socket to be on the left hand side so is it possible to install it upside down to acheive this please?
Yes there are no thermal issues in using the fixture upsidedown. Although it may be harder to use the pullcord!

We use our shaver socket to charge an electric toothbrush, so will the shaver socket work without the light being turned on?
Yes. The shaver socket would still have power even if the light is off.

WHAT VOLTAGE IS THE SHAVER SOCKET? CAN IT BE SWITCHED BETWEEN 220V TO 110V?
The voltage on this fitting can not be switched to 110v.

Very Attractive Energy Saving Shaver Light

High Output, Low Energy, IP44 Rated

Related Categories

	2G11 Base Lamp - 3000K Warm White 24W RAD31316117
Click here to choose your bulbs