Lighting Styles

www.lightingstyles.co.uk
01780 767 617

This product is no longer available and was archived on 12 January 2021

Please visit these categories for similar items or see the related products below.

Bulbs, Lamps and Accessories > Dimming Equipment 

Alternatively contact us with your specific needs and we will endeavour to assist you in your search

LED Dimmer Module - Suitable for Low Level Loads

For Loads Between 5w - 130w

Product Ref: 30487

£13.75 inc VAT

If you are considering changing to LED lamps your existing wall dimmer switch may not work with the reduced load.  If the existing dimmer does not function properly, i.e. you cannot dim lights to zero, or the lamps do not dim at all, you will need a dimmer better matched to the load.

To save you replacing the entire dimmer switch (and struggling to find a matching wall plate) you can simply swap the dimmer module in your wall switch for one that will operate the reduced load. If you do not already have the faceplate one can be purchased at any electrical wholesale easily.

This is suitable for the control of dimmable compact fluorescent and LED lamps, dimmable electronic transformers, LED drivers, toroidal transformers and tungsten lamps.

Integrated trimming potentiometer allows CFL and LED lamps to be set at a minimum level to prevent them going out or flickering at the bottom of the dimmer range.

Loads

LED minimum 5w to maximum 130w.

Incandescent minimum 60w to maximum 400w.

In addition to operating with lower loads this dimmer has a trim control, this can eliminate flickering issues when using LED lamps and control the minimum and maximum dimming levels when using LED lamps.

 

This product is no longer available
We offer free delivery on orders over £80 to most UK Mainland Addresses
This product is no longer available

Related Categories