Close Spacing LED Lighting Tape - Single Colour White

This flexible, close-spacing LED lighting tape is perfect for use with the Recessed Plaster Lighting, Coving and Cornice systems and any space requiring hidden lighting. Designed to achieve homogeneous, continuous beams of light in a flexible system able to go round corners. LEDs are spaced at 4mm centres, to provide an intense light with a minimal definition of LED spacing on plaster profiles and reflectors i.e. even when lighting objects very close by there is absolutely no dotted effect to the light.

These are high-output tapes providing approximately 2800 lumens per metre and are dimmable.

Offered here as 5-metre reels with pre-soldered lead at each end or by the metre (any length up to 5 metres) with a single pre-soldered lead. Multiple lengths of tape can be connected to a single power supply but we do not recommend any single length exceeding 5 metres. 

Rated at 22 watts per metre. A 24-volt power supply is required. The total load is obtained by multiplying the length in metres by 22 watts - a 5-metre length needs a supply of at least 110 watts.

Close Spacing 240 LEDs per metre CRI<80 and 33mm cutting distance

10mm wide maximum 22 watts per metre, typical 20 watts per metre

Soft warm white 2700k
2735 lumens per metre (124 lumens per watt)

Warm white 3000k
2822 lumens per metre (128 lumens per watt).

Neutral white 4000k
2940 lumens per metre (133 lumens per watt)

Cool white 6000k
2822 lumens per metre (128 lumens per watt)

Requires a 24V DC constant voltage power supply. Suitable drivers are listed below.

A heatsink must be used if this tape is not installed in an aluminium profile. Failure to adhere to this requirement will drastically reduce the life of this product and invalidate the 5 years warranty. 

Please add a comment to your order (in the basket) if you require specific lengths.