This is a lightweight, low profile, advanced LED fire rated downlight using an 8w COB LED chip that offers flexibility to the installer and end user.

The CCT switch below the ceiling offers soft warm white 2700°k, warm white 3000°k, neutral white 4000°k and daylight 6000°k

Lumens outputs range from 780 to 900 lumens dependent on the colour chosen.

These have a very long lamp life of over 30,000 hours and are dimmable even on standard dimmers.

Supplied complete with driver/power supply which features a loop-in, loop-out screwless terminal block.

IP65 rating provides protection from water projected from a nozzle and is completely dust-tight, Meaning it can be installed in zones 1,2 and 3 in the bathroom, and external areas, such as under porches.

Fire rated - 90 min suitable for all structures including i-joist and posi-joist
Dimmable - operates on a standard dimmer (triac)
CCT switched - choose the colour white required
Snap on decorative bezels - to suit the decor and can be installed after painting
60° wide beam angle - avoiding dark spots and shadows
Low profile, with separate control gear all pre-wired with Wago style connection block
CCT switch below the ceiling, Change the colour without removing the lights from the ceiling.
Suitable for ceiling 1mm to 30mm thick
Suitable as an emergency downlight - with 3 Hr remote battery and inverter option
Class 2 - does not need an earth connection
Pop-up spacer make this suitable for use under rolled insulation
Accoustic-rated construction - meeting building regulations requirements

Part B BS476 Part 23 tested to offer fire protection for 30, 60 and 90 minutes.

5 year manufactures warranty.

The downlight is supplied with a white bezel. Other colour options are offered below.

A maintained 3 Hr emergency lighting conversion is offered that plugs into this downlight.

Cut-out Diameter:
70mm

Overall Diameter:
87mm

Lamp Type	Long Life LED Light Source
Part L Compliant Luminaire	Yes
Dimmable?	Yes - on standard dimmer (TRIAC or leading edge)
Total Wattage	8w
Height	45mm
Diameter	87mm
Suggested Void Depth	50mm
Cut-Out Diameter	70mm
Construction	Steel
Wiring Details	Class 2 - Double Insulated - Requires no Earth Connection
IP Rating	IP65
Driver	Includes remote driver/transformer suitable for 230 - 240v supply
PDF Document(s)	Specifications

What lumens are these lights ? Would two be sufficient to light an outdoor gable end, 6ft wide?
The lumens outputs range from 780 to 900 lumens dependent on the colour chosen.

Do you need a driver per light fitting or can you loop fittings. How many fittings can be connected to one driver?
It is one driver per fitting - which is included. There is loop-in and loop-out.

Can you tell me whether the lamps are replaceable please?
The LED's are integral to the fitting and cannot be replaced.

What's the actual type of the lamp - is it a constant voltage drive or a constant current?
This is a COB LED lamp. The driver supplied is a constant current.

What clearance is required above and around this light for ventilation or fire protection?
A void of 50mm would make insulation easy but it can be squeezed into smaller voids. If putting insulation over the top of the downlight popping up the bars will raise the insulation and reduce overheating of the LED chip (which can reduce the life of the lamp). On really shallow voids the issue is getting the driver through the hole more than the depth of the light fixture.

What voltage is on this product am I required to have a 240-12v power supply per lamp
These are a mains fitting (240) that come supplied with a LED driver.