Commercial Drive Over Lighting
When recessed ground lights are used in a commercial setting due consideration must be given to two aspects: Will they be subjected to any vehicular loads? Will the glass temperature be appropriate for the location? Here we offer a range of buried exterior uplights with load capacities of two tonne or greater suitable for use as drive over lighting in drives and paths in commercial applications.
Exterior Ground Recessed Indicator Light Ø130mm
2 Options£45.00
Recessed In-Ground Luminaire with Adjustable Light Distribution - COB LED
2 Options£229.00
Freestanding LED Exterior Wall Washer Zero Glare - IP65
£245.00
Surface-Mounted Exterior Guide Lights - Single, Twin or 4 Way Lighting
3 Options£82.70
Pro HD Compact LED Recessed Ground Uplights - 316 Grade Stainless Steel
3 Options£348.00
Mains GU10 Buried Drive Over Light - Coastal Safe 316L Stainless Steel
2 Options£39.00
Black Stainless Steel Ground Light For GU10 Mains Bulbs - 105mm Bezel
£34.60
Integrated Budget Friendly LED Buried Uplight - Round or Square Bezel
2 Options£45.00
In-Ground Energy Saving Uplight - IP67 Buried Floodlight for Soft and Efficient Lighting
2 Options£46.00
Super Shallow Recessed LED Ground Light
3 Options£52.40
Recessed LED Ground Light - Anodised Aluminium 6cm
4 Options£70.00
Buried Exterior Uplight with Square Bezel - Uses GU10 Lamp
£82.50
LED Low Glare Low Level Ground Light for Paths or Walkways
£88.80
Exterior IP67 GU10 Ground Uplighter - Marine Grade 316 Stainless Steel
2 Options£117.60
Asymmetric Inground LED Uplight for Pedestrian Areas - IP67 180 Lumens
£126.00
Exterior Angular LED Guide Light - IP67 Rated
2 Options£128.50
Straight to Mains 9cm Compact Stainless Steel LED Ground Light IP67
2 Options£136.70
Adjustable LED Recessed Ground Light - Larger Size For Facade Lighting
2 Options£139.50
Adjustable Outdoor Recessed LED Light - Wall or Ground Installation
£143.00
Inground Asymmetrical Floodlight and Uplighter - LED in Warm White
£337.00
Drive over lighting is categorised by the weight and speed of vehicle likely to drive over the fitting. Designs are either buried and flush or slightly proud of the surface with a casing enclosed in concrete. Load designs start at 500 Kg and go up to 5 tonnes with vehicle speeds of up to 30 mph. Glass temperature has been a cause of concern in recent years and many new designs keep the glass temperature to 60 or 70 degrees centigrade or lower in areas where the public could touch the glass. Designs include architectural feature light effects, and traditional flat glass designs with symmetrical and asymmetrical distribution. Look through each product for specification for details.