Double Insulated Ceiling Lights
If your lighting circuit does not have an adequate earth you can either have your wiring upgraded to incorporate an earth or use lighting that is double insulated. Scroll down for more information on double insulated lighting.
Bright Energy Saving Light
Each Glass Has Wire Detail Inside
Dark or Light Wood - 1300mm Adjustable Flex
For Wall or Ceiling Use
Chrome or White - IP44 Rated for Zones 2 and 3
High Quality Polished Chrome
Matching Single and Double Bar Available
Perfect for Dining Room or Breakfast Bar
Perfect Over a Dining Room Table
Ideal for Dining Room Lighting
Chrome Detail and 1.5m Transparent Flex
Available as a 5 or 8 Arm Option
LED Lamps for Energy Efficiency
Square Polished Chrome Ceiling Rose
Swedish Design & Manufacture
Can be used on Ceilings or Walls
Available in Three Sizes
Two Finishes Available
Fine blown glass design
Matching Wall Lights Available
Lovely Gold or Silver Interior
Fully Adjustable Spots
Why choose double insulated lighting?
Double insulated Class 2 electrical equipment has all exposed metalwork separated from the conductors by at least two layers of insulation, so that the metalwork cannot become live. There is no earth connection in the lighting and often manufacturers specify that no earth shall connect to the fitting. Your safety depends upon the integrity of the two layers of insulation. British double insulated equipment is marked with the double insulated logo (one square inside another), states “DOUBLE INSULATED” or Class II.
So, why would you require double insulated lighting? Here are four reasons why you, or your electrician, require double insulated lighting:
- You have no earth present in your lighting circuit.
- The earth present on your circuit is inadequate or insufficient.
- Your electrician cannot cross bond between your lighting and other electrical items in the bathroom.
- Your electrician cannot route an earth cable directly to your lighting because of existing decoration or tiling.
References: IEC 61140: Protection against electric shock - common aspects for installation and equipment. International Electrotechnical Commission. 2001. (formerly: IEC 536-2: Classification of electrical and electronic equipment with regard to protection against electric shock, 1992)