Double Insulated Ceiling Lights
If your lighting circuit does not have an adequate earth you can either have your wiring upgraded to incorporate an earth or use lighting that is double insulated. Scroll down for more information on double insulated lighting.
Choose White, Red, Black or Green
Suitable for Wall/Ceiling or Mirror Fixed
Three Colour Options
Available in a Lovely Pink Finish
Larger 500mm Diameter Also Available
Design For The People ® - Karma
Black Exterior & Copper Interior
Available in Black or White
Matching Flex & Ceiling Plate
Design For The People ® - Float
Aluminium, White, Green or Black Colour Options
Yellow, Silver or Copper Interior Finish
IP44 Splashproof Safe for Zones 2 & 3
Matt Nickel or Chrome Finish
Diameter 112mm - Larger Sizes Available
Choose Black or Brushed Steel Finish
Three Sizes - Crystal & Satin Glass
Available in a Matt White Finish
Available in Chrome or Copper Finish
IP44 Rated Ideal for Bathrooms
Three Colours - Diameter 280mm
LEDs for Low Energy & Acrylic Diffuser
Similar to a Small Artichoke Light
Why choose double insulated lighting?
Double insulated Class 2 electrical equipment has all exposed metalwork separated from the conductors by at least two layers of insulation, so that the metalwork cannot become live. There is no earth connection in the lighting and often manufacturers specify that no earth shall connect to the fitting. Your safety depends upon the integrity of the two layers of insulation. British double insulated equipment is marked with the double insulated logo (one square inside another), states “DOUBLE INSULATED” or Class II.
So, why would you require double insulated lighting? Here are four reasons why you, or your electrician, require double insulated lighting:
- You have no earth present in your lighting circuit.
- The earth present on your circuit is inadequate or insufficient.
- Your electrician cannot cross bond between your lighting and other electrical items in the bathroom.
- Your electrician cannot route an earth cable directly to your lighting because of existing decoration or tiling.
References: IEC 61140: Protection against electric shock - common aspects for installation and equipment. International Electrotechnical Commission. 2001. (formerly: IEC 536-2: Classification of electrical and electronic equipment with regard to protection against electric shock, 1992)