Empower your lighting control with our versatile remote designed for RGB LEDs and compatible with a wide range of RGB LED tape.

Sold as a 1-zone kit with 1 remote, this system accommodates up to 4 receivers per remote, and additional receivers are available for separate purchase.

The remote offers convenient features, allowing you to toggle your tape on/off, adjust brightness levels, select from 9 Colour Programs, and control speed levels.

Easy Setup Steps:

Connect your LED strip light to the receiver, aligning connections with markings (- = negative wire / + = positive wire).
Connect the power supply to the receiver with the power off.
Insert batteries into the handheld controller.
Power on the transformer, then press any zone key within 3 seconds. Successful pairing is indicated by LED lights flashing.

Experience seamless control for your RGB LEDs with our user-friendly remote system.

Lamp Type

Will this receiver also act as led driver for 1m of your RGB led strip or is a separate driver required?
This item provides the ability to alter the voltage to each channel of the red, green and blue diodes. Doing so alters the colour of the tape or RBG product. It will require a single power supply, either 12 or 24 volts at a wattage suitable for the load.

If I have 2 parts of my kitchen which I want to light... but the same colour at the same time....do I need one receiver or two?
You will only need one receiver. Each receiver can power up to 180w.

Universal RGB LED Remote Control Kit

For Use with RGB LEDs and Flexible LED Lighting Tape

Related Products

Flexible LED Lighting Tape - RGB Colour and Tone

Related Categories