Adjustable LED Replacement Downlight for Old R63 & R80 Recessed Lights

Have you cut the hole too big? Need to replace a large old fashioned mains R63 or R80 downlight? This is the easiest and most modern answer to your dilemma.

170mm bezel - easily covering holes up to 130mm

Fire-rated - unlike all eyeball fixtures this downlight is fire rated to 90 minutes

IP65 - Safe for use in all wet areas including bathroom zone 1 if used in conjunction with a 30MA RCD

Adjustable - a 15° tilt is built in while still maintaining the high IP rating.

This downlight uses a shallow can style of enclosure, on the top is a switch to change the colour temperature, while on the control gear, you can select the light intensity.

The lumen output changes dependent on the setting chosen 

The LED light component uses an array of Osram chips in two colours. A wide 58° beam angle performs as well as a high-quality halogen bulb and has a 5-year warranty.

Intumescent seals are used to provide fire protection. In the event of a fire or high temperatures, this substance swells and stops fire from entering the ceiling void for up to 90 minutes.

IP65 rated so dust-tight and offers protection from water projected from a nozzle. This is a downlight that could be installed in all areas of the home, especially the bathroom.

Complete with an LED driver which is fully dimmable on most leading and trailing edge dimmers that can handle the lower loads of LED lamps.

Will work with existing apertures (holes) from 75mm up to 130mm. Offered in three finishes - matt white, polished chrome or satin.