12V IP65 White LED Tape

Quick and easy solution for LED strip lighting. Perfect for under cabinets, plinths or anywhere else you can think of.

Everything you need is listed below. For the simplest installation, a straight 5 metre run you'll require your choice of tape + a transformer. If you'd like to cut and join your tape to go round corners then you'll need your choice of tape + a transformer + an accessory pack.

LED Tape

The LED tape is 5 metres long and can be cut every 10cm.

IP65 rated and low voltage this tape is safe to use in wet areas. The LED strips are mounted on a sticky tape, and can be stuck to pretty much any smooth surface. Energy efficient product with low maintenance costs.

45 watts total power consumption with 60 LED chips per metre (300 total) in warm 3000°k or a much cooler 6000°k. Please be sure to use this with an appropriate 12V LED driver, wiring directly to mains will permanently damage the LEDs.

Accessory Pack

Includes:

4 corner pieces

12 tape-to-tape joints

2 extension wires

4 joint sleeves

8 mounting brackets and screws

LED Driver

100W 12V LED driver with plug, this can be removed and wired to mains if required.