A two-piece pack of holders/tensioners for low voltage tension wire systems.

Affixed to your ceiling or wall your wire is clamped into these holders which can then be adjusted to increase tension in the wires and prevent sagging.

Polished chrome, black or white finish.

Please note a small Allen key is required for installation.

Track Compatibility
	Aesthetic Domestic Track System
	Basic Mains Track
	Commercial-Grade 3-Circuit Track Lighting System
	Low Voltage Tension Wire Components
	Luxury Magnetic Light Track 48v
	Signature Recessed Track System
	Signature Single Circuit Track System
	Track for Suspending Pendants

Lamp Type
Part L Compliant Luminaire	No
Width	50mm
Height	100mm
Construction	Steel with Chrome Finish
Wiring Details	Not applicable

I’d like to install wire track lighting across the wide of my uPVC conservatory. The attachments for each end of the wire would be the uPVC frame as opposed to a solid wall or ceiling. Is this possible?
This is possible. For installation into a conservatory, you would require Product Ref: 3417 instead of this tensioners.

for a two spotlight on wire track - what else would I need for affixing to a wall
2 packs of these are required to fix a tension wire system to a wall. If you need help with everything else you would need please give us a call and we can help.

I have a wire system installed but one of the hold points is broken. The type installed is both the tension mount and the electrical feed in point. Do you have any available of this type? If not is it advisable to replace both tension mounts and buy the electrical feed in adaptors from your site?
We don`t stock the tensioner/feed-in system. So yes your best option would be to replace the tension mounts at one end and use the `LV Tension Wire Feed-In`

What distance do you recommend between a wire tensioner and a wire ceiling rod/ceiling deflector?
Around 10 to 12 inches is right for a ceiling installation.