Leaded Glass Wall Lantern - Hanging or Standing Bracket

Hi, are you able to offer the hanging version with pir motion sensor?
Sorry, the hanging version doesn't come with a PIR as standard. You could purchase a PIR unit and wire it in to the fitting however.

Does the PIR light have manual override?
The PIR cannot be switched off, however the time it stays on can be adjusted between 8 seconds and 5 minutes. The sensitivity can also be altered.

Can I get this product hanging with PIR? If not can I get standing PIR? Looking for 2x.
On a hanging fixture the lantern is lower than the wall bracket, blocking the sensor and light from the bulb switches the sensor off. We are only able to offer STANDING with a PIR movement sensor you can add this version to you basket - just scroll down.

Please can you tell me the distance from the lantern to the wall? to what will be the wall? Our post which the base will be attached to has, a beam above it that protrudes out by 70mm. Our current lantern has a 90mm gap from the wall to the inner edge of the lantern which allows a little space from beam to lamp.
The lantern has a distance (or protrudes 80mm) from the wall, therefore this option has less of a gap (between lantern and wall) than your existing fitting but you still have a 10mm gap. Hopefully this answers your question.

I’m interested in purchasing 2 of these lanterns but I need to know the width of the base plate as our porch post is only 9cms wide.
The back plate dimensions are: Height: 170mm Width: 120mm

Please can you tell me what the back plate measures and if the cable entry is central. We need to erect them on to 4inch wide pieces of wood either side of an oak door and cannot change the cabling as they are replacement lights.
The back plate is circular and mounts flush to the wall. It measures 90mm. The cable entry is central.

I see there is a 5-year anti-corrosion guarantee but what is the guarantee on the PIR?
The PIR sensor has a guarantee of 2 years.