Exterior Weatherproof Well Light - 2 Finishes

What size is the base that screws to the wall ?
115mm in diameter

Can these lamps be used in conjunction with the corner bracket which you sell to enable fixing to the corner of a building?
This light fixture can be installed with this corner bracket.

Does the PIR override function allow you to switch the light both permanently off and permanently on? In other words, is it possible to disable the PIR in both the off and on position?
Yes, there is an override function.

Does the PIR need to installed at a specific height or is there a limit to the height it can be placed at?
The beams from the PIR sensor come out like fingers; the further you are away, or the higher the mounting point, the move movement is required to trigger the sensor. Everything should work okay if the mounting height is under 3 metres from the ground.

Can these lights be surfaced wired or used with 20mm steel conduit
The wall fixing plate is plastic, this could be drilled and fixed to a galvanised surface box and wired in. This would be the best way to maintain the IP rating.

Does the PIR have a phtocell so it only activates at night or is it just a motion sensor?
The PIR sensor only detects movement.

Would this light fitting be suitable for a coastal home?
The zinc and copper versions are particularly suited for use at the coast and have a warranty that reflects this.

I wish to use these fittings in place of an existing external floodlight. It is unswitched - so operates via PIR only. Can I also use these fittings via PIR only, so connect them without the switch wire?
These can be wired to a separate PIR so they only operate via the PIR.

Hi, please can you confirm that the PIR version of this light can come on when motion is detected but can also be turned on at the wall and left on until turned off?
Yes. The PIR one has an over ride function.

What finish is the third from the left of the top row of the smaller pictures? I note that one of the first two pictures, which otherwise appear identical, has a pir.
The first two images show galvanised steel, the third image is stainless steel. The PIR is only available on the galvanised finish.

Do you have a photo of the copper light?
The 5th image shows the polished copper fitting.

Is there any way you could put a PIR sensor on the rusty brown version? If not do you have any weathered/brass coloured traditional lights with PIR sensors?
The PIR version is only available on the Galvanised finish. You can use a separate PIR on the rusty brown version, but it is not available with one built in.

Please could you advise me of the diameter of the opening of the glass shade that screws in please?
The diameter of the glass opening is 80mm.

What is the detection angle on the PIR for this light?
The detection angle of the PIR on this fitting is 100 degrees.

Regarding the copper version of the Well Light, is it possible to purchase the item without the protective coating as we would prefer a weathered look?
Unfortunately it only comes as standard with the protective coating.

Love these fixtures. Will they work in the US without issue (electrically and using US bulbs)?
The versions without PIR sensor will work okay on US voltage. The lamp holder is E27 but will accept E26 lamps.

Do you supply replacement glass for these lights. If so what price? Or do you know where I can get glass. Thank you
We can get hold of replacement glass for these well lights. Please call our sales team for details and to place an order.

Please can you tell me what colour the galvanised version with PIR sensor is?
The fitting is a raw galvanised finish i.e. zinc. This is a bright metal when new but it oxides to a darker grey colour when exposed to the elements.

Please could you confirm whether the stainless steel version of the Waterproof Well Light is the one shown in the larger main picture (the night-time one) of the selection pictured?
Yes, the main picture of this fitting is the stainless steel option.

Can you tell me if the override facility on the PIR model is activated by switching off and on again?
Yes indeed the override is enabled by switching off and on in quick succession.

Do these lights come with a bracket for corner use?
The fitting does not come pre-supplied with a corner bracket, however we do have a corner bracket available in a number of finished that if drilled is a perfect match for the back plate. Please call the office for more details.