Lighting Styles

www.lightingstyles.co.uk
01780 767 617

Ten Waterproof Colour Controllable LED Lights with Remote

Stainless Steel - Perfect for Plinths, Bathrooms or Outside Decking

Suitable for Zone 0 - protected against immersion in waterClass 3 - This fitting is low voltage and will require a transformer or driver.No, this product is NOT dimmableBulbs IncludedIncludes remote driver/transformer suitable for 230 - 240v supply

Kelvin Chart

Product Ref: 5129

From £169.50 inc VAT

This LED lighting solution provides a synchronised colour output. All heads work and change colour at the same time, there is no delay and they do not go out of synch. The image just shows some of the colour that can be achieved. Available in two sizes choose 25mm and 45mm. Each kit contains 10 LED heads which have an extremely low profile design making them discreet and suitable for indoor or outdoor use so ideal for kitchen plinths, bathrooms, exterior decking or anywhere across the home and garden where you want to add mood lighting.

With flexibility in mind, the 12 volt power supply is in-line meaning that the 3 pin plug can be removed enabling the kit to be wired into a fused spur. The power supply has two LED indicator lights: one shows mains power is connected and the second shows when a signal has been received from the handheld remote control.

The hand-held remote control operates on radio frequency (RF) so does not require a line of sight to operate the lights. The controller switches the lights on, allows you to select a variety of colour options; either fixed or on a cycle of colours, and offers the ability to adjust the intensity. the system has a memory - switch the lights of in any mode or colour and that will be continued when you switch the lights back on.

Colour modes:
This is a colour changing product - there are seven individual colours: yellow, white, red, green, blue, purple and light blue and two variable modes; rapid switching and colour phase giving a slower colour shift between colours.

Notes:
This system is not suitable for use with a dimmer switch but can be dimmed using the remote. Kits are independent; if you buy two or more they will not operate in synchronicity.

Small 0.75w. 25mm diameter lights = 20mm cutter hole

Large 1.5w. 45mm diameter lights = 32mm cutter hole

The light heads must be linked together with the leads supplied to operate. The maximum suggested spacing is 1.3 metres.

Can be fitted and wired during the decking build stage without the heads. The mains plug must be situated inside. If this is not possible you can remove the plug and wire into a IP67 external terminal block.

Supplied with a 5 year warranty.

Availability: Typically dispatched in 2-4 days
We offer free delivery on orders over £80 to most UK Mainland Addresses
Product Code
Product Title
 
Price
Quantity
Choose your product
10 Light Kit with remote and power supply
SAM59136
Small 25mm Colour Changing Ten Light LED Kit
£169.50
£141.25 exc VAT
SAM59138
Large 45mm Colour Changing Ten Light LED Kit
£196.50
£163.75 exc VAT
Optional accessories
SAM92019
10 Metre Extension Cable
£11.55
£9.63 exc VAT