Premium Trailing Edge Dimmer Module - Full Adjustment for MIN and MAX LED Loads

Light fixture and bulbs not dimming as you would expect? Then this could well be the solution for you. Replace the non-functioning part of your dimming equipment with this premium dimmer module.

Features two potentiometer adjustment screws allowing you to adjust for minimum and maximum brightness, something that makes dimming LED lamps easier.

If you are considering changing to LED lamps your existing wall dimmer switch may not work with the reduced load.

If the existing dimmer does not function properly i.e. you cannot dim lights to zero, or the lamps do not dim at all you will need a dimmer better matched to the load.

To save you from replacing the entire dimmer switch (and struggling to find a matching wall plate) you could simply swap the dimmer module in your wall switch for one that will operate the reduced load. If you do not already have the face plate then do not be concerned as these can be bought at any electrical wholesale easily.

This dimmer module can operate incandescent (tungsten lamps) or LEDs.

Loads

Incandescent - minimum 10w to maximum 400w.

LED - minimum 5w to maximum 150w.