Chrome Wall Light with Duplex Glass shade

Part L compliant light fittings must take only energy efficient lamp types and generate at least 40 lumens per watt of light. On new builds, refurbishments and extensions you'll need to use a percentage of these types of light fitting to satisfy the building control inspector.

Luckily this wall light makes use of a compact fluorescent light source yet keeps the stylish minimal design that is so often desired in neutral modern interiors.

By using compact electronic flicker free control gear the lamp gives the same pleasing effect as less efficient tungsten lamps. Just remember that you will not be able to use this wall light on a dimmer circuit.

 

Uses a 18w TC-T lamp - listed below which will last around 12-15,000 hours.

Zone 3 - Perfect for lighting either side of a bathroom mirror.

Stylish and energy saving - Giving plenty of lighting with reduced running costs. Provides as much light as a 120w tungsten lamp.

• Polished Chrome wall plate and acid etched duplex glass
• All round shadow free illumination
• IP20 Rated - can be used in bathroom zone 3

Specification
Number Of Lamps	1
Lamp Type	TC-TE (GX24q)
Spare Lamps	TC-TE Non Intergrated Compact Fluorescent (Energy Saving)
Lamps Included	No
Dimmable?	No
Max Wattage	18w
Width/Diameter	130mm
Height	125mm
Depth/Projection	155mm
Construction	Polished Chrome and Glass
Wiring Details	Class 1 - Requires an Earth Connection
IP Rating	IP20

Availability: Normally in stock - delivered in 5-7 days

Is this open top and bottom or fully enclosed by the glass shade? Is there a lower powered energy saving bulb which will fit, ideally something equivalent to about an 80w tungsten bulb? The glass is a cylinder i.e. open top and bottom. The control gear can only operate a 18w TC-T lamp which provides 1200 lumens. That said often users find that warm white lamps look less "bright" than cooler white lamps.