Small circular chrome back plate with a small thin chrome stick, which bends downwards and allows the white cotton shade to be attached to it.
Cotton white shade is rippled (not smooth like the other fittings in this range).
Shade diameter 180mm.
On/off switch located on backing plate.
Perfect for many rooms around the house, including living areas, offices and hallways.
Takes a E27 60w lamp - not supplied.
Part of a range of products, including: table lamp, floor lamp and longer armed floor lamp.
- Finished in polished chrome
- Part of a range of 4 products
- Danish design
- White cotton shade
| Specification |
| Number Of Lamps |
1 |
| Lamp Type |
E27 (ES) Mains Lamp |
| Spare Lamps |
GLS Energy Saving Halogen Lamp (Energy Saving)
|
| Lamps Included |
No |
| Dimmable? |
Yes on standard dimmer  Standard dimmers are recommended for mains voltage lighting only. Leading edge phase cut dimmer Good quality leading edge dimmers can be used on wire-wound transformers and compatible electronic transformers. If audible noise is produced we suggest you change to good quality dimmer from Richmond Lighting. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. Trailing edge transistor dimmer For use with dimmable electronic transformers (that are compatible with trailing edge technology).
These dimmers are not suitable for wire-wound transformers. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. |
| Max Wattage |
60w |
| Total Wattage |
60w |
| Depth/Projection |
260mm |
| Construction |
Polished Chrome |
Availability: Normally delivered in 7-10 days
.jpg "Click to enlarge")
.jpg)
