A high quality solid German engineered buried exterior uplight for GU10 mains halogen reflector lamps.
Manufactured with a grade 304 stainless steel cover.
Available for 35W maximum lamps.
Dimensions differ slightly for round and square versions.
Round - Ø/H: 135/115mm
Square - L/W/H: 135/135/115mm.
Mounting pot is included but the transformer is not supplied.
Requires a 120mm deep burial hole.
- Two shapes available
- 5 tonne loading limit
- Through-wiring possible
- Mounting pot included
| Specification |
| Number Of Lamps |
1 |
| Lamp Type |
MR16 - 12v Halogen Reflector |
| Spare Lamps |
MR16 35w 12v lamp - 36 degree flood
|
| Lamps Included |
No |
| Dimmable? |
On good quality leading edge or trailing edge dimmers  Standard dimmers are recommended for mains voltage lighting only. Leading edge phase cut dimmer Good quality leading edge dimmers can be used on wire-wound transformers and compatible electronic transformers. If audible noise is produced we suggest you change to good quality dimmer from Richmond Lighting. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. Trailing edge transistor dimmer For use with dimmable electronic transformers (that are compatible with trailing edge technology).
These dimmers are not suitable for wire-wound transformers. When selecting a dimmer add up the wattages of the bulbs (or transformers) you wish to dim and choose a dimmer with a suitable maximum load rating. |
| Max Wattage |
35w |
| Cut-Out Diameter |
120mm |
| Construction |
Cast Aluminium |
| Wiring Details |
Class 1 - Requires an Earth Connection |
| IP Rating |
IP67 |
Availability: Normally in stock - delivered in 5-7 days
.jpg "Click to enlarge")
.jpg "Buried Exterior Uplighter for MR16 Lamps- Saving you £19.48")