LED Kits - ten lights for use indoor or out

A pack of 10 LED lights which provide a pleasant lighting effect, ideal for decking, brickwork, paving, patios and walls. Also well suited for use in kitchen plinths.

Supplied as a kit containing 10 lights, transformer with 15 metre cable and a 240V outdoor rated 10 way junction box with 5 metre cable. All connections are push-fit so no tools are required.

Smaller heads contains a single LED diode. Medium heads contains 3 LED diodes. Large heads contain 6 diodes

Requires a void of at least 27mm. Hole size 10mm (small), 22mm (medium) and 32mm (large)

Light output: large 60 lux at 0.5m, medium 30 lux at 0.5m, small 10 lux at 0.5m.

• Kit contains 10 lights, plug top power supply, junction box and all cable
• Cool running - Safe to be touched
• IP44 Weather proof
• Also very effective when used as plinth lights

Specification
Number Of Lamps	10
Lamp Type	Long Life LED light source
Dimmable?	No
Construction	Polished Steel
Wiring Details	Class 3 - Supplied from an SELV Transformer
IP Rating	IP54

Availability: Limited Stocks: call for availability

When you mean LED non-replaceable does that mean that once they are gone the entire lamp has to be thrown away? Yes, that lamp head together with the flying lead back to the junction box would need to be replaced in its entirety.

What is the estimated life of the bulbs? We have no specific instruction for how long the LED's in this fitting should last. Experience teaches us that you should expect a couple of years life with reasonable usage however as these are non-replaceable they are not classed as consumables and so (unlike most lamps) are subject to our standard 12 month warranty.

Can these be switched by a dawn till dust sensor? In short, yes.

How long are the individual flying leads that go back to the junction box There is 5 metres of cable per LED.

Is the figure of 60 lux per lamp? What material is the lamp housing? What is the length of a lamp from top to end Each head gives 60 lux. The lamp housing is acrylic with a stainless steel Each head on the larger size is 28mm deep

Is it possibly to buy just the 15m power lead to these kits? I have 2 of the 30mm light kits and have gone through the power cables!! We only stock replacement power supplies. Is it not possible to repair the cut cable with a crimp and some heat shrink sleeves?

Can spare lamp heads be bought seperateley for the 10 lamp plinth led kits?. Thanks.(ref round led's) The lamp heads are non-replaceable so they are not classed as consumables and so (unlike most lamps) are subject to our standard 12 month warranty.