Remote PIR detector - 110º sensor

Stand alone passive infra-red sensor for indoor or outdoor use.

This motion detector works according to passive infra-red technology.

The detector will switch on the connected lights when it registers 'warm movements' within it's detecting range, and if dark enough .

The built in photocell prevents the detector from working in the daytime.

Illumination time and daylight (lux) setting is adjustable to suit various locations.

Maximum lighting load 1300w (incandescent) or 300w (fluorescent) Designed for wall mounting complete with fixing screws and rawlplugs.

Stand Alone External PIR 110º Features Vertically & axially adjustable head, Adjustable lux level, 12 metre range, 110º detection zone, Time on adjustable 5 sec - 5 min Construction ABS casing Standards BS EN 60730-2-7 IP Rating IP44 Colour / Finish Black

• Also available with a 180º sensor
• Lux and time adjustable
• 12 metre range
• On for 5 seconds to 4 minutes

Specification
Lamps Included	No
Max Wattage	1300w
Width/Diameter	95mm
Height	150mm
Depth/Projection	130mm
Construction	Plastic - ABS
Wiring Details	Class 2 - Double Insulated - Requires no Earth Connection
IP Rating	IP44

Availability: A stock item - normally delivered in 3-5 days

Is there a MINIMUM load requirement for this sensor to work. A customer of mine has 2 outside LED fittings (@ 230v) which need to be switched by a PIR. The total load is only around 4.8 watts. I bought a stand alone PIR but it needs a 60watt minimum load to work so it's been returned. Will your PIR work with these fittings? This PIR does not have a minimum required load and should work fine with your clients LED solution.

I would like to use this sensor with your pharanze wall light. Would this be suitable. I only want a 6 metre range as the property is close to the road side. Is it possible to adjust? You could simply tilt the head down so the beams does not reach the highway.

Any idea the Watts this draws (when lamp is off) Redundancy power consumption is less than one watt.

to what degree will this move on horizontal plane Regards T L This fitting would move 180 degrees. It goes all the way back and left to right.