Photocell with Nema Socket Wall Bracket

A basic yet effective way of switching your lights on in the evening and off in the morning.

A Remote photocell designed for permanent connection to fixed wiring.

3 wiring terminals (Live, Neutral & Live Load)

Wall bracket will accept 20mm conduit and fittings or plain cable entry.

Photocell unit has Nema twist on/off socket to enable the head to be changed without disturbing existing wiring.

Maximum loads 1500w resistive (incandescent) or 1150 inductive (discharge) Switches at 70 lux

• Fit and forget technology
• Thermoplastic moulding
• Wall fixing bracket supplied
• Electronic operation - relay switched

Specification
Lamps Included	No
Max Wattage	1500w
Width/Diameter	80mm
Height	120mm
Depth/Projection	90mm
Construction	Plastic - ABS
Wiring Details	Class 2 - Double Insulated - Requires no Earth Connection
IP Rating	IP44

Availability: Normally in stock - delivered in 5-7 days

Excellent product. Have used photocells (nema socket ones) for years very efficient only downside some photocell manufacturers state 70 lux switch on at dusk when in fact light comes on much earlier & off late (energy wasting) SELC (grey collared model) photocells cannot be used in conjunction with CFL lamps strobe effect occurs and shortens lamp life. gary, 5 November 2009 15:44:56

CANCan it be used with normal energy saving bulbs? Yes - just don't exceed the maximum inductive load.

I have an out door lantern with a low energy bulb in it. Can this be added to that unit? Inductive loads at low wattage can make some equipment display odd behavior. We tested this unit on two manufacturers low energy lamps and it appeared to function without issue. So we're pretty certain you'll not encounter any issues.

Is the dome removable to allow modification of the circuitry inside? This dome can be removed with force, but is not recommended. By doing this your warranty will also no longer be valid.