Compact Remote PIR detector - 180º sensor

Stand alone passive infra-red sensor for indoor or outdoor use.

This motion detector works according to passive infra-red technology.

The detector will switch on the connected lights when it registers 'warm movements' within it's detecting range, and if dark enough .

The built in photocell prevents the detector from working in the daytime.

Illumination time and daylight (lux) setting is adjustable to suit various locations.

Maximum lighting load 1200w (incandescent) or 300w (fluorescent) Designed for wall mounting complete with fixing screws and rawlplugs.

Stand Alone External PIR 180º Features Vertically adjustable head, Adjustable lux level, 12 metre range, 180º detection zone, Time on adjustable 8 sec - 15 min Construction ABS casing

Standards BS EN 60730-2-7

IP Rating IP44

Colour / Finish: Black ABS plastic

• Sensor operates at up to 12 metres
• Lux and time adjustable - to suit your needs and location
• Adjustable on time between 8 seconds and 15 minutes On for 5 seconds to 4 minutes

Specification
Lamps Included	No
Max Wattage	1200w
Width/Diameter	85mm
Height	80mm
Depth/Projection	95mm
Construction	Plastic - ABS
Wiring Details	Class 2 - Double Insulated - Requires no Earth Connection
IP Rating	IP44

Availability: A stock item - normally delivered in 3-5 days

Please advise dimensions of the MLPIR180K. I intend to fit out side under a light fitting. Height - 80mm. Width/Diameter - 85mm. Depth/Projection - 95mm The backing plate measures at: Height 68mm x Width 84mm.