Wall light with PIR sensor

Robustly built wall light in 0.85mm thick powder coated steel with built in sensor.

Can be relamped from above without tools.

Louvres reduce glare making it suitable for use at entrances.

Steel and glass construction.

PIR sensor has range of 8.0 metres with a 100 degree angle of detection.

PIR is preset at 15 lux (dusk) and when triggered switches on the light for 3.0 minutes.

Time on is not adjustable but additional triggering of the sensor add 3 minutes to the operation.

Manual overide is not possible on this fitting.

Height: 235mm Width: 230mm Projection: 260mm

• IP54 - weatherproof
• Robust construction
• Available in galvanised steel and black
• Built in PIR sensor

Specification
Number Of Lamps	1
Lamp Type	E27 (ES) Mains Lamp
Spare Lamps	E27 Long Life Decorative Lamp - Tube
Lamps Included	No
Max Wattage	60w
Width/Diameter	230mm
Height	235mm
Depth/Projection	260mm
Construction	Steel - Powder Coated
Wiring Details	Class 1 - Requires an Earth Connection
IP Rating	IP54

Availability: A stock item - normally delivered in 3-5 days

Can you tell me whether as well as being on a PIR sensor you can just have the light switched on all the time if needed (i.e for prolonged period s of more than 3 minutes) Unfortunately manual over-ride is not possible with this fitting.

I presume you can use an energy efficient light bulbs in this not the old sort no longer available? You could use a compact fluorescent E27 lamp in this fitting but we wouldn't recommend it as they normally take a few seconds to ignite and reach full illuminance. You are better looking for one of the halogen energy efficient lamps that are now becoming more widely available.