PIR Exterior Wall Light

Exterior wall light that has a built in PIR at the bottom of the fitting.

Comes in either a painted silver or a matt black finish with a white glass diffuser.

Perfect for use near entrances for adding light and a little security.

IP44 Rating - Protection from entry by solid objects with a diameter or thickness greater than 1.0mm and protection from splashed water.

Includes integral PIR sensor.

Fitting takes 1 x 40w G9 lamp which is included.

• Built in PIR
• IP44 Rated
• Perfect for use near front doors
• Silver finish

Specification
Number Of Lamps	1
Lamp Type	G9 - Mains Voltage Halogen Capsule
Spare Lamps	G9 Halogen Capsule Lamp - Clear G9 halogen capsule lamp - frosted G9 Philips EcoClassic Halogen Lamp (Energy Saving)
Lamps Included	Yes
Dimmable?	No
Max Wattage	40w
Total Wattage	40w
Width/Diameter	90mm
Height	175mm
Depth/Projection	115mm
Wiring Details	Class 1 - Requires an Earth Connection
IP Rating	IP44
PDF Document	Click to open

Availability: Normally in stock - delivered in 5-7 days

Does this light have an over ride and if so how does it work? When motion is detected after dark, the light will illuminate for approximately 2 minutes. To switch the unit into manual override mode, turn the power ON/OFF/ON within 1 second using the wall switch. The lamp will remain on for 8 hours. To reset to automatic mode, turn off the power for 15 seconds. Switch back on. The unit will go through its warm-up cycle before resuming normal PIR operation.

Some of the properties where I plan to use these lights only have short driveways approx. 5 metre. What is the area of PIR coverage? As I don't want false operation when pedestrians walk past the end of the driveways. Also, is there any way to adjust the PIR sensitivity inside the unit? The range of this PIR fitting is 5 metres. It can't be adjusted to change the sensitivity.